thread108-99861
FMCSR 393.65 states "Fuel spilled vertically from a fuel tank while it is being filled will not contact any part of the exhaust..."
Having the filler on the opposite side of the exhaust guarantees this but is not the only solution...
I am trying to determine the charge amount for a R134a TXV AC system by measuring condenser subcooling.
My question is how much subcooling is ideal(it has a reciever dryer so I'm assuming not a lot).
The other thing that I'm having a hard time wrapping my mind around is what is the ideal test...
I was working with some Osiprox Proximity sensors from Telemecanique and surprised to find out that they can detect aluminum (although at only about half the distance of steel). This flys in the face of my understanding of how an indutive sensor works. That being you basically have a...
Has anyone ever seen a tapered roller bearing cone that was designed to be disassembled. In other words the inner race, cage and rollers were designed to come apart and be put back together.
I want to support a cantilevered, high load, very low speed, 90º oscilating shaft with two bronze bushings. Don't know if PV (Pressure Velocity) calculations are valid because of possible edge loading due to cantilever. Also not sure of PV because of low speed and not a complete revolution...
How do you determine steering arm angles for Ackerman steering on a front steer axle (ie. steering linkages in front of axle). I've seen the "draw a line through the kingpin axis to the rear axle approach" for rear steer axles but applying the determined steering arm angles to a front steer...
