Ladies and gentlemen,
We're looking into importing an European high pressure machinery for Nitrogen and carbon dioxide for use in medical/pharma industry.
The machines are CE approved for the European market but could these machines be used in Texas without modifications?
As far as I know the...
Hi,
I'm trying to make a dynamic (time dependent) model in excel of The pressure and temperature (liquid phase) in a tank during a constant volume gas outtake and a constant heat flow into the tank.
At t0 the tank contains both liquid CO2 and gaseous CO2. Temp=10 deg C and pressure 51 Bar
(1) At...
Dear all,
I've read numerous posts where choked flow and supersonic velocities are discussed. Although, What I can't find is any information on is WHAT PRACTICAL IMPLICATIONS AND the magnitude of problems this may cause (chock waves, noise etc)?
In a case where there are two reservoirs for...
Is there a simplifyed formula that can be used to esitmate the energy consumption of distillation of a binary mixture?
Maybe a factor times the heat of vaporization?
Looking forward to your answers
Merry X-mas
Hi,
We have a problem with salted water/organic solvent in a inert gas stream. The mist most be eliminated prior to the compressor. We've a gas flow rate of max 230 liters/minute and to start of simple we would like to pass it though a vertical pipe (inside diameter of 80mm) containing a...
In laboratories, there is a common “vacuum suction” thing (looks like a “T” working on the principle that tap water moving past a junction (T-junction) don’t know the name for it) will case a low pressure due to the high velocity (Bernoulli’s eq). This I can understand intuitionally, but with...
Hi!
I received a large quantity of data from one of my students.
The variables (factors) are the final concentration in a bulk solution.
Components A or B are mixed with different ratios of x or y or z...
Water is also used 0 or 0,1%
A and B are present at 0,4 or 0,8 % when added into the bulk...
IN a thick walled cylindical reactor subjec to an internal pressure, a flat lid will be attached with 8 bolts.
I would like to calculate the stresses/Strains in the shell, especially radially outside the bolts in the shell in order to understand where to place the bolts and how much shell wall...
Hi!
In a cylindrical reactor with a inside diamter of 100mm with wall thickness of 35 mm a flat lid 40 mm thick will attached by 8 bolts,each 10 mm diamter. The bolts will be screwed into the shell wall. The construction in stainless steel.
How many mm of material (Shell wall) is required...
Hi!
I´m currently calculation of the dimensions of a small (inside diameter 100 mm, height 200 mm)) cylindrical lab reactor with a flat head closure (like a blind flange with bolts). THe working pressure is 120 bars.
The flat head blind fange type of closure have three approx 10 mm round...
