I have a part with multiple configurations so when I double click a dimension to modify it I am presented with an option for "All Configurations", "This Configuration", or "Specify Configuration(s)". By default this always selects "All Configurations". Is there a way to set this to default to...
Running Mathcad 13.
I am trying to contruct a user friendly generic format for our design verification files, one that can be used accross the product line. I currently have a list box containing the drawing numbers for each component that can change. I want the user to select the drawing...
I am in search of a material to add a controlled failure piece to a current valve design. I am looking for a material that has a tensile strength capable of taking the operating load of the valve (approx. 35000 psi tensile yield), but that shears at a relatively low and predicable value.
My...
Cross Posted from Valve Engineering-
Does anyone have a definitive reference for the required tap depth for a 3/8" NPT port. I understand from reading on here the tap depth is not usually called out, but if anybody has a standard or a guide that I could check our test parts against, I would...
Does anyone have a definitive reference for the required tap depth for a 3/8" NPT port. I understand from reading on here the tap depth is not usually called out, but if anybody has a standard or a guide that I could check our test parts against, I would much appreciate it.
I have a bonnet with...
Is it possible to insert a toleranced dimension into a note on a drawing? I tried using the real dimesion (with the tolerance already defined) as well as a dimension I created just in the drawing and in both cases the note only show the nominal dimension. I am trying to create a note that calls...
