Hi guys, We have been running a 20 h.p motor at 90HZ through a 1336 plus drive trying to find the optimum speed for one of our processes,the motor tolerated this for about 36 hours and then quit, the motor was a severe duty motor and the motor amps were correctly entered into the drives...
Hi,
I have a fairly old hydraulic unit and it has a combined level / temp switch screwed into the top of the reservoir by a 1 in plug but i can't find any details or makers name on this item its 10 in long with a float around the bottom of the shaft.
There are also three red leads coming...
Hello all,
We use a large number of A-B 1336 drives at our facility and we use line reactors on the output side of our drives but not the input,is this the industry standard as i would have thought that on the input side it would have made the drive less likely to have trouble from...
Hello all,
I am having trouble finding a suitable method of applying grounding clamps to our centerline motor starters, we have a bank of 4160V 600H.P motors controlled by Allen Bradley Centerline starters 5000V 3PH 1200A 260A max. when we have our motors periodically hi pot tested, we...
