I am working on creating a remote wireless throttle control for a 20 year old detroit diesel engine. I would like to know if anyone knows how the battery, starter, solenoid, and alternator are wired to an ammeter, DC contacts and a start button.
thanks ahead of time.
I have an existing #6 AWG feed cable coming off a distribution panel which extends 520 ft. to the load. I would like to take this feed conductors off the panel and connect to a dedicated MCC. Cost is an issue, so I want to know if I can splice this cable with another cable? The 520 ft feed...
Anyone,
I am trying to understand what the problem is and how to resolve the issue. I have copied notes on the above subject. Can someone explain.
From C. T.
Sent Tue 3/21/2006 1:31 PM
Subject: RE: FOLLOW UP: UNIT 3 EXCITATION FIELD FLASHING PROBLEM ANALYSIS
R. J. H.,
YES, I AGREE IF WE...
Anyone
Looking for suggestions on how I can setup monitoring equipment to monitor continuous temperature for a 4160V motor via 10 ohm RTD.
Currently, I am looking at terminating the RTD leads to a signal conditioner, 24VDC power supply, and an 8 channel voltage logger. OMEGA part#: OM-CPOCTVOLT
Anyone
We have a 4160V, 3000 hp circulation water pump motor where the stator coils show cracked VIP resin at the spacers and this is typical all the way around on the ODE with little on the DE. I am curious to know if I should be concerned about this. Does anyone know what could be the cause...
Can anyone point me in the right direction, to correctly size a transformer for a 3 phase motor starter? I am interested in calculating the correct power rating in KVA.
I am not sure if this is correct, but I am using this formula: KW = HP * 746 / 1000
KVA = KW * 1.5(Form Factor)
This is new to me so I would like to ask for some assistance on how to integrate a (Foxboro IA) data highway and ethernet. The ethernet will be used to send alarms from the transforer to the control room, using Allen Bradley PLC. So far this is what I have. Currently a (Foxboro IA) is used...
I would like to ask if anyone has used the product, Envirotemp FR3 Fluid manufactured by Cooper Power System to retro-fill an existing distribution transformer(7500 KVA)?
If so, would you recommend it?
Thanks, ahead of time.
ngs
