I need some help with this one.I don't know much about EDM's. I build small high speed stamping dies. I want to EDM hardened punch blanks of CPMM4 material. The punches are max. size of 1.5" wide x .75" thick x 3.0" long. They need a profile cut across the 1.5" at one end only thru the .75"...
Is there an automatic BOM (stocklist) function in UG NX3? I've attributed all my parts, putting a detail # in the "name" box, and I have the parts list template, now what?? Any suggestions are greatly appreciated.
I need to write a BOM on my parts and assembly using a customized parts list. I found the flyout standard forms which are not quite right. I have attributed each part with mat'l and stock sizes. Where is the BOM function located and how does it work? Using NX3.
Thanks in advance if I am unable...
I am trying to get a spaceball 3003 to work on UG NX3 using a USB port with no luck. Our computers have no serial ports, only USB. The 3003 has a serial plug. So I bought a USB to RS232 adapter cable thinking it would work, it did'nt. I installed a driver for the cable, and 3 drivers that I...
HI, I've worked on General Motors UG and they have a neat screw and dowel program. You set the screw or dowel parameters, pick the two mating blocks and presto! the screw counterbore and matching tap are ed for you. When I left GM and went to an outside design house, they
model each...
I need to convert a Unigraphics file to Ideas. I know how to IGES it out and import it from Ideas, but the problem is I have numerous ( hundreds) of items that need translating. It would take far to long to iges each one separately. Designing in UG is much easier than doing it in Ideas, for me...
I am trying to do a transform / 4 point fit on 2 different blocks that are on different planes and angles.( the blocks, or the point pattern is the same for both blocks). I need to align, or fit 2 of the surfaces together. I can do it in SDRC Ideas, but can't figure it out in UG. Any ideas is...
I'm new to autocad. I need to cut a section thru what appears to be a 3D wireframe ( The surface originated in Catia, but I recieve it in wire ). I can do it in Cadkey by drawing a line (not a plane) where I will cut and using the section command. Points are constructed where my section line...
