can some kind person ( or an unkind but helpful one ) , please advise me on choosing the correct tolerance for a shaft and bearing housing
i have a 300 RPM shaft running on 22212E ( spherical ) and 3212 ( double row angular contact ) bearings.
what machining tolerance do i use ( H7 / N7 / M5...
i have a 50 kw hydraulic motor , driving at 300 RPM ( 1500 N/m torque )
i want to check that a DIN 5480 spline 40 - 3 - 12 - 9H
can transmit that torque , spline length is 40 mm
i am machining a shaft from 4340 steel , no heat treatment after machining , the splined part is the smallest...
hello people.
i am after opinions on tooth type , patterns and spacing for rock saws , cutting at around a 50-60 mm wide cut .
Blade diameter is 2000 mm - 2600 mm , driven at 60 - 120 rpm
We are currently using tungsten carbide conical points in adaptors.
We generally cut sandstone for tunnel...
Hi peepil.
I use filtered compressed air as breathable air when doing many welding processes (hardfacing,fluxcored,Air Arc gouging etc).
Wonder if anyone can help me with air compressor fume output....I have been told that air compressors can produce Carbon Monoxide from the pistons.
Of...
I have been repairing blocks of 5120H in an extremely high fatigue application, (they hold a 120 kg steel component which oscilates at around 300 cycles per minute),weight is around 150-200 kg per block.
They are originally toughened and hardened (to approximately 63 rockwell) , and i need to...
I am after information on embrittlement in aluminium structures (marine and aircraft) due to thermal cycling , ie night / day .....winter /summer conditions.
(both in welded and mechanicaly fastened structures)
and also embrittlement patterns due to age
I realise that this is a very wide...
I am after information on embrittlement in aluminium structures (marine and aircraft) due to thermal cycling , ie night / day .....winter /summer conditions.
(both in welded and mechanicaly fastened structures)
and also embrittlement patterns due to age
I realise that this is a very wide...