does anyone help me to find the right formula?
i looking for how amount the broaching force to cut 8.46dp, length of cut 3.4dp and 74 teeth
work material is carbon steel
the broaching pitch is about 0.5dp so the number of engaged teeth is more or less 7
thank you very much
Diana
hi!
does anyone help me to find the right formula?
i need the broaching force necessarely to cut 8.46dp, length of cut 3.4p and 74 teeth
work material is a carbon steel
the broaching pitch is about 0.5 so the number of engaged teeth is about 7
thank you very much
Diana
does anyone help me to find the right formula?
i need the broaching force to cut 8.46dp, length of cut 3.4dp and 74 teeth
work material is carbon steel
the broaching pitch is about 0.5dp so the number of engaged teeth is more or less 7
thank you very much
Diana
someone have ever heard factory named as ORAMT (hobbing machine), DEMAK (hobbing machine), HERZUS (broaching machine), HAMBURG (shaping machine)?
any suggestion is well come
thank you for the replay
Ester
hi
i need / look for an excel prog that help me in calculate broaching force noto module / DP, OD, material to broaching, shift coefficent
thank you in advance
luke
hi! i've got a question that drive me crazy .. about involute fillet intersection diameter at the tip of teeth.
how do i calculate the diameter in wich semitopping start?
thak you very much
giorgia c.
hi all,
someone can tell me in poor words which are the most used
method to grnding spur gear?
and .. what is the difference between (for example) Niles and Kapp or Opal machines?
are there any web sites where i can found the information that i'm looking for?
thank you very much for help
Luky
hi!!
i've got an external spline with 36 teeth, internal diam 38.75mm (1.52 inches)and external diam 41.65mm (1.64 inches) pressure angle 45 degree and Sndp 1.675mm.
someone can help me to define which is the correct standard?
if it would be a SAE standard could you send to me some information...
HI!!
someone can help me??
i'm looking the dimension over pins and venier of an
32 teeth
module 0,5
30 degree pressure angle
full fillet root
thank you very much for patience
the problem is how to determine the upper and lower allowances in a gear mesh according to din 3967.
maybe also din 3960 and din 3962 are request to calculate
the tolerance field.
thank you
i'm looking the normative as soon as possible!!!
someone tell me where is the speedy way to obtain this standards???
i need before Christmas.
thank you all
this is the spec i've found in lots of idraulic motors catalogs to define spline shaft output.
i would like to say if this is the same standard as ANSI B92.1-1970 or not and if no, where i can found this normative.
thank you very much
hi
i'm looking for a copy of a Geartyechnology back issue.
the Nov/Dec2001 issue.
an article inside talk about how to define profile shift
coefficient.
i'm interested in it.
than you for your help
i have to set a gear measuring machine with a fixed master disk (it seems a croix) of 187.400mm base diameter.
i found mod.3.62595 and number of teeth 55 to get in a prog and it run well.
so the profile control it's ok for spur gear.
now, with the same base diameter, number of teeth and helix...
.. of a gear with the gear in a hand?
once someone told me that there is formula that permetted
this.
for example for a gear with 24 teeth it sound like this:
mod = (W4 - W3)/ (z * sin pa)
this is a wrong formula but it is similar to the right one.
thank you all
