We are involved in a small LNG storage and tanker loading facility and need to review the likelihood of rollover in the tanks. Are there any guidelines to this phenomenon?
The tanks in question will be vacuum insulated tanks (VIT’s). The tanks will be approximately 5 m diameter and 36 m long...
We have a good chance of being awarded a project to replace their Cons and Tailings leach tanks. They have had a lot of liner failures on these tanks with the current Corrocoat linings. They are after proven lining system that will last 5 years plus in the aggressive leaching environment, which...
We are interested in a non metallic, small submerged pump for pumping out the contents of a HDPE lined firewater dump pond from large SX plant. The flow and head requirement would be approx 50 m3/h and 40 m. We envisage that the pump will be located in a large HDPE pipe, submerged in the pond...
We are interested in a non metallic, small submerged pump for pumping out the contents of a firewater dump pond from large SX plant. The flow and head requirement would be approx 50 m3/h and 40 m. We envisage that the pump will be located in a large HDPE pipe, submerged in the pond. This is to...
We are interested in a non metallic, small submerged pump for pumping out the contents of a HDPE lined firewater dump pond from large SX plant. The flow and head requirement would be approx 50 m3/h and 40 m. We envisage that the pump will be located in a large HDPE pipe, submerged in the pond...
Hi Engineers
We are wanting to inject approx. 3 tph of 3.5barg (before control valve) steam into an approx. 470 m3/h solution @ 65 to 70 oC. Spirax Sarco is the only supplier of steam injectors that comes to mind, but I don’t know if they supply them that big. I guess multiple parallel units is...
Hello
Does anyone have a schematic of a REVERSE FLOW solvent etraction mixer-settler used in the mineral processing industry. Better still an equipment datasheet for one with sufficient detail for a fabricator to give a price estimate from. I have to produce a datasheet am trying to avoid doing...
We are doing some work for a client, converting an existing TEG regen unit to MEG service. Due to the salinity of the produced water, the Rich MEG to be processed has a high salt content (of the order of 12,000 ppm TDS). The concern is that the salt will deposit on the tubes of the reboiler tube...
