Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: way
  • Content: Threads
  • Order by date
  1. way

    Geothermal Injection Wells - Information

    I am looking for literature (preferably OnLine info) about Geothermal Injection wells, artesian wells, and aquifers. Any suggestions?
  2. way

    Sizing Criteria for Sand/Oil Interceptors

    I am looking for typical sizing criteria for Sand and Oil Interceptors. I know that the Interceptor Size is typically calculated using the following formula: Retention Time * Waste Flow Rate = Interceptor Size But what are typical values for Retention Time and Waste Flow Rates for various...
  3. way

    Sizing Guidelines for Sand / Oil Interceptors

    I am looking for typical sizing criteria for Sand and Oil Interceptors. I know that the Interceptor Size is typically calculated using the following formula: Retention Time * Waste Flow Rate = Interceptor Size But what are typical values for Retention Time and Waste Flow Rates for various...
  4. way

    Parallel Piping Systems.....Books and On-Line Info

    Does anyone know of any Books or On-Line Articles about Parallel Piping systems and how to calculate the system head loss? Also does anyone have any recommendations for software programs that work well for closed loop parallel piping systems (HVAC two and four pipe systems)?
  5. way

    2000i Layouts: Problems with Scale and Linetypes

    I have been having a hard time setting up Layouts to scale correctly to the scale I want (usually 1/4"=1'). I also cannot get my linetypes to transfer from my model(drawing space) to my layout and plot. Any suggestions on these areas is greatly appreciated.
  6. way

    HVAC Design Books and Classes

    I am fairly new to the HVAC world, and I am trying to get up to speed on designing heating/cooling systems (especially forced air). Can anyone recommend any good books or short week long classes that will get me headed in the right direction? Thanks.
  7. way

    Isometrics....Help!

    I am trying to draw piping Domestic Waist and Vent isometrics, and I am not doing so well. I usually switch to the SE viewpoint and go from there. I have troubles when I change directions, and start trying to draw fittings. Any Suggestions?
  8. way

    Combustion Air

    I am designing a combustion air system for a residential home. The Mechanical room has appliances that total 573,000 btu/hr. The General Contractor has suggested that we place two openings (12"x12")in the mechanical room wall that will feed into a small storage room that will have...
  9. way

    I am designing a combustion air sys

    I am designing a combustion air system for a residential home. The Mechanical room has appliances that total 573,000 btu/hr. The General Contractor has suggested that we place two openings (12"x12")in the mechanical room wall that will feed into a small storage room that will have...
  10. way

    Acid Mixing and Tube Corrosion

    We need to inject sulfuric acid into the cooling water at one of our power plants. The easiest spot for us to do this is in the pipe right before the water goes to our steam condenser. The distance between the injection point and the condenser is only 5 feet. We are going to be injecting acid...
  11. way

    Acid Mixing and Tube Corrosion

    We need to inject sulfuric acid into the cooling water at one of our power plants. The easiest spot for us to do this is in the pipe right before the water goes to our steam condenser. The distance between the injection point and the condenser is only 5 feet. We are going to be injecting acid...
  12. way

    Prefabricated Outdoor Enclosure

    I am currently setting up a remote booster pump station. The booster pump is going to sit on a small concrete pad (approximately 4'x2.5'), and I need a weatherproof enclosure to cover the pump. I'm trying to stay within budget, and I figure that a prefabricated enclosure would be cheaper than...
  13. way

    Power Plant Performance Monitoring Systems

    Does anyone out there know of any good on-line Performance Monitoring Systems? I am looking into installing a Performance Monitoring system on two of our Coal Fired Units. Presently I am looking at EtaPRO by General Physics and SmartProcess by Westinghouse.....any others out there? Thanks in...

Part and Inventory Search

Back
Top