Is there any way to incorporate a Nx Open .dll within mold wizard? Ideally, to create a new button that would allow program execution without exiting mold wizard?
If not, is there a way to execute a Nx Open .dll within another NX window/command that would return to the Nx window/command without...
What is the best method of reducing the number of knot points in a curve?
Currently, we stroll along the curve and visually look for high density areas. We then split the curve around that area, delete the high density area, and bridge the curve back together.
DHuskic
Nx9.0
Hello,
I am attempting to create an extrude with single-sided offset but it is collapsing the face sometimes and only building one of the collapsed regions. Is there any way to force it to build all of the regions or switch which region it builds every time? See attached image for sample
NX...
Is there a way to set an expression equal to a component's translation? The information I want connected to the expression would be under Component Properties -> Information. This opens a listing window and under Component Translations, the output looks like something below. I want to create 3...
Does anyone know if the Hide/Shade/Wireframe functionality, that a user can typically access after studying an interference and right clicking on the interference, can be somehow accessed without studying any interference's? It would save us a tremendous amount of time we currently have to wait...
I'm a little riddled at some of the hard interferences I am receiving as a part of my Clearance Analysis testing. I am testing an assembly that should be a real life representation of our components once they are assembled. I keep getting false hard interferences that have no penetrating...
NX randomly stopped allowing a user to export to excel and we are getting the error below. Have tried googling, searching this site and GTAC but unsure of what is happening. Worked fine 2 days ago. Excel works as a stand alone currently.
&MACRO FOCUS CHANGE IN 1
&MACRO FOCUS CHANGE IN 1
&MACRO...
Trimmed Sheet Tolerance Issue:
NX9 - Windows 7
We are receiving unusual results with this command and we can't seem to understand why. The curves are projected onto the face from a continuous end-to-end chain of curves.
When we use the Trimmed Sheet command on this patch, we get these...
I am attempting to move a component from a csys I created on its solid body to the ABS csys to try and keep it simple(if I can do this then will I simply translate the component later). The problem is rotating the component correctly. The solid body is not consistent with the component csys. I...
I am looking for a method to extract points(.001" spacing between points) from all visible faces in the work view and export them to a text file. Even if anyone have a journal that can extract points from a single face, that would give me a good place to start.
DHuskic
Data Prep NX7.5...
We are in the process of changing the methods in which we manufacture and order all of out materials. I haven't had too much experience with the BOM Parts List so pardon me if I use the wrong verbiage. For simplicity, we have an attribute "Station", which will have a value of 1, 2, or 3...
thread561-306976
I have been trying to piece together a journal to export the parts list and spreadsheet but have not found too much documentation on the latter. I would like to export the spreadsheet to Excel first, then create a new sheet and copy/paste the parts list into here somehow...
I am trying to figure out how to get the component and edges from a point. For this journal it will have you select a corner point on a body, and from there; I plan to use the component the body is under and the respective edges from that corner to move it. I need the edges to create a csys(I...
So I have a simple journal to give me a name attribute for each component. The reason I do not want to use the one that comes standard in the navigator is because it gives me the Original layer instead of a number. However, this journal does not give me numbers either. Any ideas how to get...
This may be something simple that I am overlooking but how would I read a component attribute through a journal and assign it to a string variable? The main purpose being able to read the descriptive part name.
Denis Huskic
Data Prep NX7.5
Kettering University
Class of '17
Journal Efficiency:
Could anyone help shed some light as far as best language to use with the journal in terms of efficiency and other important aspects to consider when choosing the best one? For example, between Eng-Tips and Gtac a majority of files I find for reference when starting a...
I am trying to put text on a new revision part I made. I need to put an string of text on all of our revision parts.
I haven't been able to find any journals for this so I just recorded it. I do not know how to take care of line 82. This buttons should be universal for my parts but I do not know...
Does anyone know of any way to export out .xdw files from NX7.5?
Whether is be a grip or a journal, if anyone knows of a way to do so, please let me know.
Thanks!
Denis Huskic
Data Prep NX7.5
Kettering University
Class of '17
Has anyone attended one of the Open API Programming course Through Siemens?
If so, can you share your thoughts/opinions on what they provided as a part of this class?
I was asked by my company to look into NX journal programming and macro's and have been attempting to learn it by myself but it...
I am in search of a journal that moves all displayed objects to the WCS using their respective Part CSYS. I am running NX7.5, and would be moving geometry that is either all unparameterized or all parameterized but never both at the same time. I know the difference between doing this task by...
