Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: JBCZL
  • Order by date
  1. JBCZL

    Annealing Temp. lower than the required according ASTM Std. (B 409-01)

    Adding, the temperature is indicated in forging certificate (the accesory is a BW CAP, 14" sch. 140), not in base material certificate (the ussual I think) Many tanks again
  2. JBCZL

    Annealing Temp. lower than the required according ASTM Std. (B 409-01)

    Dear all, I have a material certificate of a Nickel-Iron-Chromium Alloy Plate (ASTM B 409-01, UNS N08811, incoloy 800HT) of thickness = 1 1/4 " (31,75 mm). The problem is they are indicating annealing Temperature between 2012ºF and 2138 ºF (they do not specificate an unique temp.), but ASTM...
  3. JBCZL

    Welding Allowed maxium oscilation in SMAW vs GMAW

    Where can I find these limits? I think in ASME IX there are, but I do not where. Many thanks
  4. JBCZL

    ASTM A234 WPB instead of A106 Gr.B SMLS?

    Yes, the fittings were ordered to ASME B16.9 Many thanks again.
  5. JBCZL

    Is it obligatory to require NDE in A-105 accesories?

    Sorry, I do not explain very well. Yes, it is ASTM A-105. In Purchase order is not required Supplementary Requirements S5 and S6. Many thanks for your quick reply.
  6. JBCZL

    Welding Allowed maxium oscilation in SMAW vs GMAW

    Why in SMAW process the maxium oscilation is 3 times the electrode diameter and in GMAW process is 8-9 times? Ussually SMAW diameters: 2.5, 3.25, 4 and 5 Ussually GMAW diameters: 1.2 I think the answer is in ASME CODE (maybe IX), but I can not remember where Many thanks
  7. JBCZL

    Is it obligatory to require NDE in A-105 accesories?

    This specification requires PT or MT in the surface of the accesorie, but only in suplementary requirements. Can I obligate them to carry out NDT? Material certificate only says of Visual and dimensional checking, anythng of NDT. By the way, ¿It is obligatory to indicate the real mesurements of...
  8. JBCZL

    ASTM A234 WPB instead of A106 Gr.B SMLS?

    Dear all, I have material certificates of the following accesories: 2 x 1 1/2 ECC. SWAGE NIPPLE BEXPE Sch.80 1 1/2 x 1 ECC. SWAGE NIPPLE PBE Sch.80 1 1/2 x 1 CONC. SWAGE PBE Sch.80 1 x 3/4 CONC. SWAGE NIPPLE PBE Sch.80 X 160 They have deliverey us in ASTM A-234 WPB instead A-105 Gr.B...
  9. JBCZL

    ASTM A105 Equivalents? Help Required

    In european standard EN 10025 you can find the equivalence between EN designation( S235 JR) and german designation (ST 37)
  10. JBCZL

    is valid to use ASME II Ed. 2001 for A234 Gr. WPB?

    Many thanks. J
  11. JBCZL

    is valid to use ASME II Ed. 2001 for A234 Gr. WPB?

    I am checking material certificates of forged accesories (ASTM SA-234 Gr. WPB) where all are referenced to ASME II Ed. 2001. Can the vendor issue a certificate with an old revision of the ASME II Part. A code? Is it mandatory to use the last revision of the code (Ed 2004)? Could I reject all...
  12. JBCZL

    What consumables would you use on API5L X52?

    I prefer to use 7018 or 8018, always with a higher yield strengh. If you are using X52 you need an electrode with 7430 psi or higher. E7018 only give 7000, I would prefer E8010 or 8018. In my opinion, rutile electrodes (E6010, E6013) for piping are not good, and less in this case (you will have...

Part and Inventory Search

Back
Top