Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
25 lbs preload spring
You do not mention the profile of the vibration. For example if you are using a random on random profile, the peak G's can be 4 times the RMS value. If you are just vibrating in an open loop mode, ie no control accelerometer, then I would look for a resonate condition. You can also examine...- RHD
- Post #5
- Forum: Mechanical Acoustics/Vibration engineering
-
Proper bearing temperature measurement
I agree that the best place to measure the brg temp is on the raceway. Since you are finding different temperatures in the same design gearboxes, the loading must be different. How are the brgs mounted? Press fit?- RHD
- Post #5
- Forum: Bearing design, manufacture and maintenance
-
Planetary Gear Lubrication
I use Diester based greases in our gearboxs such as Aeroshell 12. It has a good temp range. The obvious question is, can you use an oil? This would give the best cooling for the gear teeth. If you can't seal the oil in, then a grease is required.- RHD
- Post #5
- Forum: Gear and Pulley engineering
