Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. hkmensing

    Vaccum Assisted Resin Infusion Molding (VARIM) - Knowledge and skill

    Hi PanelGuy, Thanks for your reply. I'm open for suggestions.... cheers, GM
  2. hkmensing

    Vaccum Assisted Resin Infusion Molding (VARIM) - Knowledge and skill

    HI Hooflungdung, Thanks. Vestas is the competition. And we're using VARIM already for some years. It is just that in the USA we'll have to start from scratch. That is why I look for information/people who work/have worked with VARIM. Cheers, GM [sleeping2]
  3. hkmensing

    Vaccum Assisted Resin Infusion Molding (VARIM) - Knowledge and skill

    Hello B.E. Thanks for the info. Yep, they are produced in India at the moment. And yes, 42m is quite long, though we are also looking to produce longer blades. Cheers, GM
  4. hkmensing

    Vaccum Assisted Resin Infusion Molding (VARIM) - Knowledge and skill

    Hello gentlemen, Thank you for your input. [thumbsup2] The process we use for producing the blades is VARIM. We therefore look for people/organisations/experts who can do this for us. Next to that I am looking for locations where we can train (if necessary) people on this. Best regards, GM...
  5. hkmensing

    Vaccum Assisted Resin Infusion Molding (VARIM) - Knowledge and skill

    Hello everyone,[wavey3] My company is currently in the process to set up a rotor blade (for windmills) factory in the US (Minnesota). Blades are 42m. in length. [COLOR=red]I would like to know what knowledge and skill is available in the US, and especially Minnesota with VARIM? [/color red]...
  6. hkmensing

    Flow rate and viscosity testing - preferably in Hong Kong or China

    Hi All, [wavey] [wavey] [wavey] [wavey] [wavey] Someone informed me that there is a better test called: Gel-permeation chromatography (GPC). It's supposed to be quicker than the above mentioned. Anyone know of labs in Hong Kong and/or China which can do this test? I know one University...
  7. hkmensing

    Flow rate and viscosity testing - preferably in Hong Kong or China

    Dear All, [wavey2] Does anyone know whether there are labs in Hong Kong or China, where I can do any of the following tests: Melt Flow Index (MFI) - Melt Flow Rate (MFR): ASTM D 1238 (Procedure A), D3364, ISO 1133 (Procedure A) Scope: Melt Flow Rate measures the rate of extrusion of...
  8. hkmensing

    Accelerated life test for lights

    Hi, [wavey3] I'm looking for ways to do accelerated life tests for different types of lighting (mainly Christmas lights). How can I do this? cheers, [idea] GM [morning]
  9. hkmensing

    Macro cameras

    Rich2001> Thanks for the link to proscope. Very interesting, but I cannot use it for what I'm looking for. The proscope needs a laptop and that would mean I would have to by 20 laptops as well. Cheers, GM
  10. hkmensing

    Macro cameras

    Dear All, [peace] [bugeyed]I'm looking for a small, cheap (around US$100.- - US$150.-), digital macro camera for our QC's to take pictures of defects of products in factories. They visit a lot of factories, so the camera should be small. And most defects are a small size so the camera must take...
  11. hkmensing

    Fake UK Plug

    ScottyUK and BrianG >> I agree totally, I've told them the same things quite a few times, but as long as I can't convince 'em of that, it will remain my problem. Luckily I enjoy my job and can deal pretty well with the daily problems (some people can be very, very rude), and believe in due time...
  12. hkmensing

    Fake UK Plug

    Hello again, Yes, but my company does not falsify anything. And the product does have the CE mark. The factory just decided after the proper checks by a lab, that a fake plug would be cheaper, i.e. more profit. Cheers, [cheers] GM
  13. hkmensing

    Fake UK Plug

    Hi All, I agree with you all. BTW, it's not MY company. I just work here. I already asked management several time to actually quantify projects. With this I mean, find out what we're buying, how much time each and every person has to spend on a project, how often we have to visit the factory...
  14. hkmensing

    Fake UK Plug

    Hello all, [wavey3] Thx for the input. It's very helpful. I've talked to the management about the use of cheap, cheaper, cheapest manufacturers, instead of focusing a bit more on reputability and quality, but the story is always the same: cheap, cheaper, cheapest! We do ask for certification...
  15. hkmensing

    Fake UK Plug

    Dear All, [wavey] [wavey] [wavey] Late last year, on one of our products (a glue gun), we found (too late) that for production (in China) the factory changed the plug from the official one to a fake one[thumbsdown]. This meant a a lot of re-work (in the UK) for a lot of...
  16. hkmensing

    Belt sander grinding belt wears off quickly

    Dear HTH and others, [wavey3] The material that is sanded is steel. The reason I'm saying that it wears off quickly is because we use a reputable testing lab to test them. They tell us that the grinding belts wear off quickly. [reading]I've found some data where it suggests using graphite...
  17. hkmensing

    Belt sander grinding belt wears off quickly

    Dear All, [flip] We are buying belt sanders from a factory (we are a trading company), but in tests we have had done, the grinding belt wears off quickly. The test report states that this is because the pulley is smaller than the grinding belt. Besides changing the pulley, are there other ways...
  18. hkmensing

    Acceptance sampling plans, MIL-STD-105E or ... ?

    Hello all, [wiggle] Thx. for all the info [reading]. It has increased my knowledge and confirmed my thoughts on MIL-STD-105E. jrhols> I'd like to test your program. I don't really like to post my email address anywhere public, but here it goes: gert@whihk.com.hk. For all of you a bit more...
  19. hkmensing

    Acceptance sampling plans, MIL-STD-105E or ... ?

    Hello all, [wavey3] I'm currently looking at acceptance sampling plans. In our company we use the MIL-STD-105E, but from information I'm gathering (mainly from the internet), it's not the best way to do acceptance sampling. Does anyone know of better ways to do acceptance sampling? Our products...

Part and Inventory Search

Back
Top