Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: ciddik
  • Order by date
  1. ciddik

    welding machine to weld 0.2 to 0.5mm thick sheets in SS316

    unclesyd, thanks you, i found one with weldlogic siddik
  2. ciddik

    welding machine to weld 0.2 to 0.5mm thick sheets in SS316

    hi everybody can anyone help me to select the welding m/c to weld metallic plate of 0.2 to 0.5mm thick ss316 plates radially I know it is done through TIG welding m/c, but I m searching for actual configuration. plz help thanks siddik
  3. ciddik

    Selection of Elastomer(material) for API682 seal

    can anybody help me for the selection of elastomer of mechanical seal for MDEA solution, temp: 50deg C, pressure, 40 bars(max) the seal design is as per API682. siddik siddik
  4. ciddik

    Mechanical Seal Working and Failure Causes

    for online review try www.mcnallyinstitute.com siddik
  5. ciddik

    Suggestion for plan API 51 with heating?

    Dear mbmech i agree with flexibox, to use dual seal but then u have to go for jacketed type of gland to maintain the temperature above 100 deg C. or else the inboard spring loaded face will hang up siddik
  6. ciddik

    Mechanical seals under vacuum

    No the seal will not allow the air to enter unless there is proper cooling for seal faces & seal is properly design to handle vaccum conditions, as self balanced seals do siddik
  7. ciddik

    Mechanical seal for a molten sulphur application.

    dear Ram babu using metal below seal is quite good idea, but it will cost 4 times than the other selection. we have provided mechanical seals in sulphur where only the seal faces comming in contact with the media the rest of the seal parts (spring etc.) completely isolated from the pumping...
  8. ciddik

    O-Ring Problem

    FEP (teflon encapsulated Viton) is better & cheeper solution for your problem try this, good luck siddik
  9. ciddik

    Typical seal life

    dear tahir its good to use carbon against bronze then TC, ie. car/bronze. good luck siddik
  10. ciddik

    welding of metal bellow

    hi canyou give me any brand or company name who manufacturers welding machin for metal bellow siddik
  11. ciddik

    friction torques

    I wanted to know about the friction torques required to overcome for the seals like O ring,PTFE. If you can provide me the formulas or some equation to calculate these torques for seals in valves ,it would be an great favour on me. siddik
  12. ciddik

    welding of metal bellow

    i am looking for welding mechain to weld metal bellows so can any body suggest me what type, make machine i should buy siddik
  13. ciddik

    Sealing of Water Based Paint (again)

    hi milkboy, this is one of the typical promblem we faced with a paint manufacturing plant, & we design for them seal equi to Burgmann HR Series. I think you should try one of that with double seal in tandem arrangment, hopefully you will get good result your face selection is ok, but inbord...
  14. ciddik

    lapping process for a one-piece flow

    hi gedeos, i noted your problem, i thinks if you use kerosene or toluene by flushing it on the running lapping plate, then it can wash out the material & then u can inspect the finished rings. siddik
  15. ciddik

    Mechanical seal vs. packing in oil pumps

    Mechanical Seal is the best choice rather than packing, which directly enhance the efficiency of pumps, we used mechanical seal in high temp oil pump & is running successfully from many years. The proper selection is neccessary siddik
  16. ciddik

    Diamond Lapping Paste

    yes i have to start commercially, please help siddik
  17. ciddik

    Diamond Lapping Paste

    can anybody help me for chemical composition & preparation method of Diamond Lapping Paste siddik
  18. ciddik

    Diamond Lapping Paste

    can anybody help me for chemical composition & preparation method of Diamond Lapping Paste siddik
  19. ciddik

    Abradable seal

    Actully what happens to the seal faces?
  20. ciddik

    Oring problem

    you can ttv 'O' ring ie Teflon coated viton 'O' Rings

Part and Inventory Search

Back
Top