Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Corrosive handling pump choices
well, i keep sending thoughts in separate posts. solids might be an issue unless i screen/filter at intake. just another complication- Spilcher
- Post #7
- Forum: Pump engineering
-
Corrosive handling pump choices
this might work. air and electrical supply is not a problem. it would be nice to simplify by not using air but if this is trouble free and eay to replace valve, then i could try- Spilcher
- Post #6
- Forum: Pump engineering
-
-
Corrosive handling pump choices
i am seeing pump failure due perhaps to corrosion and solids but possibly to low temp viscosity of caustic. I'd like to find a pump with specs above to operate with a variety of oxidizers and corrosives. Maybe there is a particular pump design (i.e centrifugal, diaphragm, other) you might...- Spilcher
- Post #3
- Forum: Pump engineering
-
Corrosive handling pump choices
My problem is frequent pump wear due to corrosion. Would someone be able to provide advise on the pump type options needed to move caustic (na persulfate in Naoh as an example, oxidizes or reducing agents) with pH >10. I need a flow rate between 3 and 10 gpm. I need to pump the liquid <300...- Spilcher
- Thread
- Replies: 7
- Forum: Pump engineering
