Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. nicoga3000

    STAAD Natural Frequency vs Classical Methods

    Great question! I modified my input file to include the command SET SHEAR, which forces STAAD to ignore Shear Deformation. That solved one of our other unrelated questions.
  2. nicoga3000

    STAAD Natural Frequency vs Classical Methods

    So problem has been mostly solved! The answer was not at all what I expected. My model was correct, my math was correct, but the ratio of end mass to beam mass was not. The Blevins calculation is for a "slender beam with a concentrated end mass". What it doesn't really explain is that...
  3. nicoga3000

    STAAD Natural Frequency vs Classical Methods

    I'll definitely peak at it tomorrow. Really, I need to figure out how to model in FEA the Blevins example. That's where I'm at with it. I'm happy to admit my model is wrong. But if that's the case, I really want to know what the correct answer is.
  4. nicoga3000

    STAAD Natural Frequency vs Classical Methods

    @Denial I'll double check that. It could be exactly that, which means I'll need to look at how to define a large mass at the end of the cantilever. @GregLocock I'll check my output in the morning once I'm back at the office. I believe we were looking at this and noticing that they didn't...
  5. nicoga3000

    STAAD Natural Frequency vs Classical Methods

    I am trying to determine why STAAD provides a different frequency for a simple beam with concentrated mass model versus proven classical methods for the same model. The results are different enough to merit a discussion. If any of you have STAAD, I have attached my input file. You can perform...
  6. nicoga3000

    Effective Area Method for rings + FEA question

    I have been looking into the Effective Area Method outlined in NAVFAC DM7-02 for rectangular and circular footings. However, for instances of designing foundations for silos or similar structures, ring type foundations are typically used (circular foundation with an outside and inside radius)...
  7. nicoga3000

    Metal deck bucking due to compression from lateral load transfer from wall studs?

    All of my decking design resources are at the office, but I would imagine one way you could do this is to treat the decking as a pinned column. You have your section properties of your deck and should be able to determine the buckling strength from that. You make a good point, though - I'm not...
  8. nicoga3000

    Actual bearing vs allowable bearing

    I recently came across a report that gave loadings, foundation properties, allowable bearing, and actual bearing for a large water tank. Something comes across as very odd in this design. Loads D = 2860 kip F = 8360 kip W = 7800 kip*ft Foundation Dimensions OR pad = 25'-10" IR pad = 10'-1"...
  9. nicoga3000

    Octagonal and circular mats

    Here's a simplified approach of my analysis. I'd be happy to provide additional information to anyone who may be interested in looking at things. I opted to do an upload to Imgur so others can take a peak. http://i.imgur.com/FaVhL.jpg
  10. nicoga3000

    Octagonal and circular mats

    I've got a 4' thick pad at the moment. I may look at going to 54" to see how that helps. And you are correct JedClampett - OT on this tank is NOT an issue!
  11. nicoga3000

    Octagonal and circular mats

    Thanks for the information folks! @Michel60 - I appreciate the info. I'm making sure to work closely with our foundation department and concrete field head to make sure that we detail and lay everything out in such a way as to help our crew work as efficiently as possible. @JoshPlum - you...
  12. nicoga3000

    Octagonal and circular mats

    I've been working on the design for an octagonal mat for a storage tank over the past few days. Originally, I looked at a circular mat, but the rebar requirements were astronomical (the spacing was getting close to 3" c/c on #11 bars...so that won't work). The rebar requirements for my...
  13. nicoga3000

    Studying for the PE

    I do a lot of concrete and steel, but my structures are non-standard, so we use a lot of specialized procedures. Regarding your licensure, I wouldn't imagine that your PE is revoked if you don't pass the SE!
  14. nicoga3000

    Studying for the PE

    I'm going to get in touch PPI and NCEES tomorrow. Thanks for the idea. @SteelPE The reason I'm not taking the Structural exam is because of what I do for a living. Realistically, I don't do enough classical design to feel comfortable with the material being tested. I could possibly take it...
  15. nicoga3000

    Studying for the PE

    Hmm - what do you mean? I'd be taking the structural afternoon exam as that's what I do.
  16. nicoga3000

    Studying for the PE

    Aye - thanks Rich2001. I'll do a little research there and check out the CERM. I may try and contact the publishers of the CERM to see if they included the 2012 updates as part of their 2011 revision. They may have known they were coming and updated to the new codes that came out last year...
  17. nicoga3000

    Studying for the PE

    This is not a thread on "How do I study" as that's not really what I need to know. I'm not eligible to take the test until October of 2013, but I have considered getting materials together and working my way through the CERM and other references. I realize some folks may say it's too early/too...
  18. nicoga3000

    Fundamental Frequency and General Seismic Help

    Hi all - I've been working with STAAD.Pro V8i for just over a year and have never been able to really wrap my head around the Seismic Design engine within the software.  I've tried to read the documentation, look for tutorials online, etc. but I've had no real success.  I've created a really...
  19. nicoga3000

    Taking the PE and SE

    Regarding msquared48's post, I'm limited to the wood exposure I can get in my job. Concrete and steel are the extent of what we do, and it's not your typical bridge/building work. The lack of bridge exposure is what has me most worried. I guess that's why I was asking if it's feasible. The...
  20. nicoga3000

    Taking the PE and SE

    Hi all - I'm in a unique situation, so I figured I'd look for some input from other professionals who may or may not have come across something similar. I've been an EIT for 2.5 years now, so I'll be eligible to take my PE in Fall of 2013. I'm probably going to start brushing up and gathering...

Part and Inventory Search

Back
Top