Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
-
Acrylic Pressure Vessel
as an RTP-1 certificate holder and a memeber of both ASME RTP-1 and ASME Section X i must reply and dispel some of the misconceptions of cost. first Acrylic is not one of the materials recognized for construction of vessels to ASME RTP-1. there is a section for dual laminates - thermoplastic...- keeled
- Post #4
- Forum: Boiler and Pressure Vessel engineering
-
RTP-1 Code Stamp?
to date it is not a code and has not been adopted by any jurisdiction- keeled
- Post #5
- Forum: ASME (mechanical) Code Issues
-
RTP-1 Code Stamp?
hankroach: being an active member of the ASME RTP-1 committee for over 15 years i have to comment on your question: each of the accredited manufacturers have written QA/QC procedures, have trained and tested their employees, have produced and tested various laminates and reinforcements, and...- keeled
- Post #3
- Forum: ASME (mechanical) Code Issues
-
Welding Fume Hood Calculations
start here: http://www.acgih.org/home.htm this is what they do - industrial ventilation they offer reference material and training good luck- keeled
- Post #3
- Forum: Heat Transfer & Thermodynamics engineering
-
Hydrofloric Acid
generally HF can be handled by fluoropolymers depending on your concentration and temperatures, some good sites to visit are: www.symalit.ch a manufacturer of fluoropolymer sheet www.ausimont.com manufacturer of fluoropolymer resins http://www.dupont.com/teflon/chemical/tefz.html remember HF...- keeled
- Post #14
- Forum: Corrosion engineering
-
storage tank for sulfuric acid! immediately
you may need to consider a dual laminate tank - either CPVC/RTP or a Tefzel(ETFE)/RTP construction. follow the design, inspection, and testing requirements of ASME RTP-1 Mandatory Appendix M-12 for best results. www.viatec.com visit this site for one source of design and manufacture. you will...- keeled
- Post #7
- Forum: Corrosion engineering
-
HDPE Pressure Vessel
ASME RTP-1 does not address solid thermoplastic design and construction. The only available information is contained in the DVS documents from Germany. the DVS 2205 standard is a good start. you can purchase the DVS/DIN standards from the following...- keeled
- Post #11
- Forum: Boiler and Pressure Vessel engineering
-
basics of composites
http://mil-17.udel.edu/index.html#files if neither of those sources satisfy your curiosity try the above website- keeled
- Post #3
- Forum: Composite engineering
