Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. jsschweitzer

    Clad Steel Welding

    The information contained in articles published by the organizations below support the two primary methods of welding clad steel as follows: 1. Remove cladding during joint preparation, then weld the backing steel (base metal) with the appropriate carbon or low-alloy steel consumable, and...
  2. jsschweitzer

    Clad Steel Welding Process

    The information contained in articles published by the organizations below support the two primary methods of welding clad steel as follows: 1. Remove cladding during joint preparation, then weld the backing steel (base metal) with the appropriate carbon or low-alloy steel consumable, and...
  3. jsschweitzer

    Clad Steel Welding

    I have looked at the specifications you have recomended and observe the following: UG-99(g)(3)"all welded seams which will be hidden by assembly be given a visual examination for workmanship prior to assembly" - I do not understand the point you were trying to make with this reference...
  4. jsschweitzer

    Clad Steel Welding Process

    I am looking at the section VIII code book in section UCL-31 - Joints in Integral or Weld Metal Overlay Cladding and Applied Linings it states as follows: "(b) When a shell, head, or other pressure part is welded to form a corner joint, as in Fig. UW-13.2, the weld shall be made between the...
  5. jsschweitzer

    Clad Steel Welding

    Dean please elaborate on why you would weld the carbon side first, I am finding many resources that agree with you, however I am trying to understand why this is, instead of just blindly following what my research shows.
  6. jsschweitzer

    Clad Steel Welding Process

    The method of welding you described was described to me by another welding engineer, but I don't completely understand. One thing that I thought about was that if you weld the stainless side second, isn't it likely carbon content will end up contaminating the corrosion resistant layer of metal...
  7. jsschweitzer

    Clad Steel Welding

    I have a vessel constructed of A516 gr 70 clad with 316L Stainless Steel in accordance with ASME section VIII and my question is related to the welding of clad material. I do not have very much experience with this type of material and need to find out if the carbon steel side or the stainless...
  8. jsschweitzer

    Clad Steel Welding Process

    I have a vessel made of A516 gr 70 clad with 316L Stainless Steel. The vessel is to be constructed in accordance with ASME section VIII and my question is related to the welding process of clad material. I do not have very much experience with this type of material. I need to find out if the...
  9. jsschweitzer

    Fiber glass tolerances

    Is anyone familiar with fiber glass and what industry standard tolerances are for this material? I am looking particularly for informatation about using it in piping (diametral tolerances). I have been looking in the RTP-1 manual and can not find exactly what I am looking for.

Part and Inventory Search

Back
Top