Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. pitagoras15

    Question about Amplitudes and Mapped Fields.

    Hi there, I need to use Amplitudes (I'm using Tabular type) and Mapped Fields in a simulation that I'm working on. The problem is that I don't know exactly how the field 'Amplitude' in the 'Edit Amplitude' Window works. The same happen with the 'Field Value' in the 'Create Mapped Field'...
  2. pitagoras15

    How to change BIAS direction in Python

    I found the solution. I changed the edges selected in end1Edges from the ones in end2Edges and it works. I don't really know why, but it works for me. Regards
  3. pitagoras15

    How to change BIAS direction in Python

    Hi there, I need to know how to change the direction of the BIAS meshing, but I need to know how to write it on Python. When I do it from the CAE, in the .jnl there is no difference. Any idea? The line that I get from the .jnl refered to BIAS meshing is...
  4. pitagoras15

    Abaqus, how to use an output temperature in next job?

    Please, I really need some help here. Is the last step of my Master's Degree Project :(
  5. pitagoras15

    Abaqus, how to use an output temperature in next job?

    Hello, I need to know how to use an output data (temperature in this case) from a previous job as a initial PredefinedField in next job in Abaqus. I need to do it 400 times, so I'm doing it with a Python Script. The only difference between jobs is that I delete one little part after each job...
  6. pitagoras15

    How to use an output temperature in next job

    I must be doing something wrong. In the message area is written that 'Abaqus Warning: The C:/SIMULIA/Temp/Taladro_Job5.odb file will be used', so it is obvious that is going in to the file, but it's not getting the values properly because the result is the same weather I make the program going...
  7. pitagoras15

    How to use an output temperature in next job

    From here: mdb.models['Model-1'].Temperature(absoluteExteriorTolerance=0.0, beginIncrement=50, beginStep=2, createStepName='Initial', distributionType= FROM_FILE, endIncrement=None, endStep=None, exteriorTolerance=0.05, fileName='C:/SIMULIA/Temp/Job-1.odb', interpolate=OFF, name= 'Predefined...
  8. pitagoras15

    How to use an output temperature in next job

    Ok, I've solved it. I had to delete all predefined temperatures from first job. The problem that I have now is that I have to do this like 100 times. And the number of increment of each job is different. One job does 56 and another 40 for example. And I need to call the last increment from last...
  9. pitagoras15

    How to use an output temperature in next job

    Thanks for your help. I don't have too much Python knowledge so what I do is to work from the GUI, and then take the script from the .jnl that Abaqus automatically do when you save. I'm doing these steps: 1. Go to the Load module and choose "Predefined Field --> Create". 2. In the "Create...
  10. pitagoras15

    How to use an output temperature in next job

    Hi, I need to know how to say to Abaqus to save the values of a temperature of the last instant from last job. This way, in the next job I'll be able to use that output data as initial boundary condition. Also, in between jobs I have to eliminate that last part, but I've already done this in...
  11. pitagoras15

    Temperature field.

    Try youtube, there are a lot examples that I think can help you: http://www.youtube.com/results?search_query=abaqus+heat+transfer Regards.
  12. pitagoras15

    How to delete a partition during a job.

    Hi, I need to make some simulations of a wall drilled in 2D on Abaqus. I need to know if is there any possibility to apply heat flux, and then eliminate a partition, all in the same job. I've been looking in the 'Steps' but I don't find the way. Thanks in advance. Regards.
  13. pitagoras15

    Help with an easy script

    Hi, I do know how to parameterice the coordinates for the deepness, but I do not know how to do it for for example the name of the job, that should be changing like: job1, job2, job3... Also, I need to know how to do it with the Model name. Do you know what I mean? Regards.
  14. pitagoras15

    Help with an easy script

    Hi, Thanks for your reply. The problem is that I don't know how to do a loop and I don't know how to name parameters to the depth information. Do you know any example I could use to see how it is done? Regards.
  15. pitagoras15

    Help with an easy script

  16. pitagoras15

    Help with an easy script

    Hi there, I need some help with a project that I am involved in. It is the study of the heat transfer of a drilling. I need to make a script that make a simulation of the heat transfer while the drill goes into the piece. (See the image to understand) I have already done the first simulation...

Part and Inventory Search

Back
Top