Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Prjmustang

    Rivet Edge Distance by a radius in material

    I guess the word "cap" is what is confusing, even though that is what they use in the plans, the orientation is correct, the strips are perpendicular to the skin, so the "cap" of the spar is really just the bent edges of the .040 web where the skin if riveted to. I added some more to the drawing...
  2. Prjmustang

    Rivet Edge Distance by a radius in material

    I attach a drawing of the spar and a picture from another builder that is reaming the attach bolt hole, the part I am building is on the right side of that picture. For the first 20" of the spar it requires 5/23 rivets, so with the .25" radius the center of the rivet would have to be around 3/8"...
  3. Prjmustang

    Rivet Edge Distance by a radius in material

    The strip is not bent just a radius cut into it, and if I use 2D+.05 standard the rivet will end up being in the radius area. Is there a way to insert a quick drawing?
  4. Prjmustang

    Rivet Edge Distance by a radius in material

    I am building a kit plane from plans and currently working on the spar, it is composed of a .040-2024T3 AL web bent into a "C" configuration, then there are cap strips .125" thick 2024-T3 which are stacked up 3 on each side of the web both top and bottom that make up a laminate structure .79" at...

Part and Inventory Search

Back
Top