Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. JasonG

    What is a "Class C" Geotextile?

    The state stormwater regs specify that geotextile must meet "federal department of transportation requirements for a Class 'C' filter fabric" beneath rip rap and as an interface between layers in infiltration treches. Where can I find the specs for a "Class C" fabric?
  2. JasonG

    Estimating Sediment Accumulation??

    From the Rhode Island Soil Erosion and Sediment Control Handbook: Equation #1: for low density residential development (lot size greater than 1/4 acre). SV = [(76.6 x RA x TE) + (4.0 x DA x TE)] x T Equation #2: for high density residential development (lot size less than or equal to 1/4 acre...
  3. JasonG

    Stormwater Modeling Software Opinions

    HydroCAD is the best in my book. Not only does it offer great functionality and is easy to use, it is based on TR-20 and TR-55. This is essential for permitting around here. The documentation and technical support is outstanding as well.
  4. JasonG

    Time of Concentration - Time or Distance?

    The Time of Concentration is often described as the time for water to travel from the "most hydraulically distant point". My Civil Engineering Reference Manual adds "timewise" to this definition. What is the general consensus out there? Do you use the path that gives the longest Time of...
  5. JasonG

    detention basin

    You'll need to use an impervious geotextile liner.
  6. JasonG

    Sewer flow Peak Factors

    Here are a couple of more references: http://www.michigan.gov/deq/0,1607,7-135-3313_44117-163660--,00.html also, go here: http://nepis.epa.gov/Exe/ZyNET.EXE?ZyActionL=Register&User=anonymous&Password=anonymous&Client=EPA&Init=1 and search for 625r92005 Good luck
  7. JasonG

    Designing an orifice plate to restrict flow

    Dickon17 - thank you, thank you, thank you for the explanation. Putting it that way clears it up for me after all these years! Once the flow is in the pipe the flow rate is constant. However, the head loss in the pipe restricts how much flow can ENTER the pipe to begin with. mbeychok -...
  8. JasonG

    Designing an orifice plate to restrict flow

    I understand the difference and relationship between flow rate and velocity. I know that if the flow rate is constant then velocity increases with a decrease in area. So then how is it that an orifice restricts the flow rate? Wouldn't the velocity increase hence maintaining the flow rate...
  9. JasonG

    Designing an orifice plate to restrict flow

    Thanks for all of your help. I have 2 more questions if you don't mind. 1) Perhaps you can explain something to me that I can't seem to wrap my mind around. It seems common sense that a small hole in an orifice plate will limit the flow through a pipe system. However, the continuity equation...
  10. JasonG

    Diameter of suction pipe

    Excuse this dumb question from a civil engineer but this scenerio you describe has long perplexed me. I am more comfortable working with open channel flow. Perhaps you can explain this to me. If I understand correctly, the 20" pipe has been chosen to increase the flow rate. Why wouldn't the...
  11. JasonG

    Designing an orifice plate to restrict flow

    It looks like that is a derivation of the equation for flow from a tank: Q=C x A x root (2 x g x h) That was what I had planned to use but I wasn't sure if it was appropriate for this application. Thanks for the confirmation I appreciate it.
  12. JasonG

    Designing an orifice plate to restrict flow

    I see what you mean. Yes, there will be a valve for that purpouse. Would you mind describing how you arrived at the 0.2 inch diameter?
  13. JasonG

    Designing an orifice plate to restrict flow

    You are right. My original design did restrict the flow with the friction loss of the pipe length. The owner has asked for an orifice plate for maintenance reasons though. I can't use a valve for this application either. The restriction needs to be "hard wired" so to speak. I can't take the...
  14. JasonG

    Designing an orifice plate to restrict flow

    I have designed an underground flow diffuser to recieve bleed off water from a cooling tower. I must restrict the flow of water to the diffuser to less than about 3 gallons per minute. I want to use an orifice plate to do this. The bleed line is tied into a pressurized pipe. The pressure at...
  15. JasonG

    Online CE training

    You could take a PE exam review course for a quick and dirty overview. Here's a link to one: http://ppi2pass.com/ppi/PPIInfo_pg_pereview-index.html
  16. JasonG

    Online CE training

    What type of work do you want to train for? Civil/Environmental is very broad.
  17. JasonG

    Too much work?

    An important, and difficult, skill in life is knowing where to draw the line between work and life and then doing it. It doesn't matter what is typical. What matters is what you are comfortable with. Decide for yourself how many hours you are willing to work and stand your ground. There will...
  18. JasonG

    Cover sheet vicinity maps

    www.topozone.com has topos for the all of the US
  19. JasonG

    Goals for the year

    I told my supervisor that my goal is to work less and make more money.
  20. JasonG

    Origin of Priority Pollutant Metals

    Thank you.

Part and Inventory Search

Back
Top