Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. ywioywio

    fluid79

    can fluid80 be used to simulate fluid trapped inside a cavity with Pressure(DOF) i want to couple a volume of fluid with a rubber container where the container will be deformed causing pressure rise inside the fluid however, when i experiment with fluid80, there seems to be no DOF for pressure...
  2. ywioywio

    rotating a hollow cylinder

    thanks for your help i'll try this model
  3. ywioywio

    Re: solid-fluid interaction

    Hi elogesh and hulkhogan, thanks for your advices, guys i think my previous question is rather vague my 3D hollow cylindrical model is completely closed (i.e acts like a container or tank fully filled with liquid) displacements will be apllied to the solid cylinder alone, and the fluid is...
  4. ywioywio

    solid-fluid interaction

    Hi, thanks for your advices, guys i think my previous question is rather vague my 3D hollow cylindrical model is completely closed (i.e acts like a container or tank fully filled with liquid) displacements will be apllied to the solid cylinder alone, and the fluid is initially at...
  5. ywioywio

    solid-fluid interaction

    dear all, i want to simulate the solid-fluid interaction and be able to calculate the hydrostatic pressure of the fluid. my model consists of a closed cylinder completely filled with fluid, and the cylinder will be deformed in a certain way, such that the hydrostatic pressure of the fluid...
  6. ywioywio

    ploting curvature of surfaces

    my model consist of irregular surfaces, and i want create a colored contour plot of the curvatures(such as mean and gaussian curvatures) on the model after some deformation can i do this using ansys, and how should i go about doing this. thanks
  7. ywioywio

    rotating a hollow cylinder

    Dear all, i've built a hollow cylinder which is enclosed at the lower end, and meshed it with solid186. The model is fully constrained (ux,uy,uz=0), and i'm trying to apply a rotation of 20 to 30 degrees at the enclosed end. however, when i tried applying the rotation (just 1 degree), enclosed...

Part and Inventory Search

Back
Top