Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. twalicia

    Cyclone size and oil droplet size

    I'm not sure if you wish to separate and collect/ salvage both oil and refrigerant? If you just want to remove oil from the vapourised refrigerant, then you can consider using a micron filter, such as those used in air compressors to remove oil from compressed air.
  2. twalicia

    H2SO4

    Zirconium is a good alternative to Ta and is cheaper. It is slightly more expensive than Hast alloys but better corrosion resistant. Try this link http://www.alleghenytechnologies.com/wahchang/pages/products/data/zirconium/zrsulf2.htm
  3. twalicia

    Keep razor blades sharp

    Hey, if you guys have problem with your blades, try one of the razor blades for women. Mine lasts more than 2 months w/o any care at all. Its called Gillette Venus.
  4. twalicia

    High Temp Sulfuric resistant materials

    Hacksaw, we don't use a pump. As the vessel is pressurised, we relieve the pressure from 4 bar to about 1.5 - 2 bar, then the slurry is sort of push through into a holding tank where we quench it to lower temp. However, there is a hast-C valve at the bottom of the vessel.
  5. twalicia

    High Temp Sulfuric resistant materials

    I am looking for a material suitable for use to make an agitator in a pressure vessel operating at 4 bar, max 150oC, submerged in boiling H2SO4 at 20% concentration. The vessel contain abrasive clay slurry at 30% solids con. Would appreciate some recommendation on a suitable material. Currently...

Part and Inventory Search

Back
Top