Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. pajalin

    CSE driver DMG NZX2000 for NX CAM

    Hello everyone, Would anyone help me modify the CSE driver for the DMG MORI NZX2000 lathe with Fanuc? I wanted to use CSE from sim13_turn_4ax, but it would be better to use CSE from sim15_millturn_9ax where it differs in the first channel. The simulation is a hinged head and the NZX2000 has a...
  2. pajalin

    Help with editing the CSE driver for NX CAM

    Hello everyone, Would anyone be here to help me modify the CSE driver for the DMG MORI NZX2000? I used the CSE driver FANUC from OOTB sim15_millturn_9ax. I need to change the driver for two revolvers. One revolver at the top and the other down. In OOTB there is a head with B axis and it does...
  3. pajalin

    Manual MORI SEIKI MAPPS IV

    Good day everyone, you do not have someone guide MORI SEIKI MAPPS IV in pdf or direct someplace where he could download? I am trying to get it, and so far without success. Thanks for any information
  4. pajalin

    UGOPEN AutoChamfer.dll

    I'll be glad for any information about UGOPEN and the way you have programmed automatic shrinkage.
  5. pajalin

    UGOPEN AutoChamfer.dll

    Hi, is there any possibility to get the file? I want to see how it all looks and learn to program. There's an available manual? thanks Paul
  6. pajalin

    UGOPEN AutoChamfer.dll

    Hi, is there any possibility to get the file? I want to see how it all looks and learn it programovat.Je an available manual? thanks Paul
  7. pajalin

    UGOPEN AutoChamfer.dll

    Hi all, you do not have someone to provide file AutoChamfer.dll for UGOPEN NX CAM? Thank you and best regards Paul Lin
  8. pajalin

    Generating maximum machining depth in the NC code

    Hi all, I need a little help. I need to generate NC code with tools maximum cutting depth of the operation. In the post I created a feature that I at the end of the operation lists the maximum depth to which the tool will go and now I need a function that should me moved to the beginning of...
  9. pajalin

    NX10 Error NX License: License server system does not support this feature. [- 18]

    So I looked at it and it lists the following errors: 7:00:35 (ugslmd) UNSUPPORTED: "NX10450_geometric_tol" (PORT_AT_HOST_PLUS ) Marek Lipka@pclipka (License server system does not support this feature. (-18,327)) 7:00:35 (ugslmd) UNSUPPORTED: "MA_geometric_tol" (PORT_AT_HOST_PLUS ) Marek...
  10. pajalin

    NX10 Error NX License: License server system does not support this feature. [- 18]

    Ok. I'll be there.
  11. pajalin

    NX10 Error NX License: License server system does not support this feature. [- 18]

    Yes license is NX10. It happened to me already on two computers. One installation was completely new and second to move from NX9.
  12. pajalin

    NX10 Error NX License: License server system does not support this feature. [- 18]

    Hi all, I need to deal with the problem in NX 10. After installing the NX10 + installation license manager and license settings at startup NX10 is booted, but get an error: Error NX License: License server system does not support this feature. [- 18] uz I tried reinstalling and even install the...
  13. pajalin

    Using Attributes in PostBuilder

    I have successfully managed it in a user-defined events. Thanks so much for your advice
  14. pajalin

    Using Attributes in PostBuilder

    Should not you have an example of how to do it ? With UDE I have no experiences.
  15. pajalin

    Using Attributes in PostBuilder

    My idea is that I need when generating each operation in the NC code to get the correct stock size to zero point for HEIDENHAIN (BLK FORM). I wanted to just define these attributes in dimensions through WORKPIECE and then when generating NCkódu any operation that has been installed by a...
  16. pajalin

    Using Attributes in PostBuilder

    Thanks very much, I found the variables you need, but I have one problem. The variable that retrieves the attributes of WORKPIECE mom_attr_GEOMVIEW_ (name). so it only works when in generating standing on WORKPIECE. I need to be able to generate each operation separately and drew the attributes...
  17. pajalin

    Using Attributes in PostBuilder

    Hi all, I want to ask whether there is any variable attributes for drawing out those who are in postbuilder? Can I retrieve attributes of instruments mom_attr_TOOL_ (name) from operations mom_attr_OPER_ (name), folder mom_attr_PROGRAMVIEW_ (name) or from the model mom_attr_PART_ (name). I need...
  18. pajalin

    Postbuilder BLK FORM HEIDENHAIN

    Hello, I would like to ask for advice on post-processor for NX CAM. Creating a post for HEIDENHAIN need to generate beginning BLK FORM. Now it generates BLK FORM with values ​​that are written in the post. I need it to generate coordinates from the model. This means in order to generate the...

Part and Inventory Search

Back
Top