Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. tsmith62

    electromagnetic flowmeter for partially full pipe

    I would contact Krohne. They have a partially filled mag meter offering and they have extensive waste water experiance. They will likely have a reference.
  2. tsmith62

    Level measurement in Silos with powder

    We have had good success with laser transmitters in platic chip and pellet silos. Typically if the laser pointer can hit the level the laser transmitter will work. There are also some special fill and keep features that can be used when filling the silo. Coating issues should be elimibated...
  3. tsmith62

    Lined Plug Valves Reference List

    When refering to DN600 are you refering to valve size? Are you meaning lined or sleeved plug valve? Lined means that the whole interior of the valve is lined with typically a Teflon material. This is typically used in corrosive services. All "wetted" parts are typically Teflon. Sleeved...
  4. tsmith62

    Valve isolation tank

    Given the size of the line being 30" and I am assumeing an ANSI 150# or 300# tank rating or less I would suggest you look at a Triple Offset Butterfly Valve. These are typically firesafe to API 607 4th edition and are zero leakage. I would first contact Adams Valve in Houston TX or if you are in...
  5. tsmith62

    High Temp Valve Manufacturer

    If 600F at 100 psi is your design temperature and pressure this application will fit soft seated materials. Xomox makes plug, ball and butterfly valves that will fit this application. SVF also makes ball valves that could work. If 600F at 100 psi is your acual temperature and pressure I would...
  6. tsmith62

    3" throgh 6" rubber seated butterfly valve popping out of seat

    I have several 3", 4" and 6" butterfly valves with double acting air to air actuators on them. The valve seat is a dovetail design. The actuators have no travel stops. When solenoid is energized to open the valve the valve disc suddenly pops out of the seat. I have heard that a cartridge...

Part and Inventory Search

Back
Top