Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: Byucougar
  • Order by date
  1. Byucougar

    PLug for Bell end of pipe

    The lining is cement - have you ever done this before?
  2. Byucougar

    PLug for Bell end of pipe

    Our company lines pipe and it gets spinned to the inside of the pipe including the bell end of the pipe - does anyone know of a way to seal off the bell end of pipe so that does not occur?
  3. Byucougar

    Coating pipe

    Where I work, we coat pipe all the way down and then remove the last 6 or so inches of coating after it was coated. This is done on an assembly line fashion and the coating is applied while the pipe spins and the coating gets thrown against the inside of the pipe usng centrifigal force. What...
  4. Byucougar

    Pipe stop

    we are looking for a pipe stop which will stop pipe rolling down a rail. This pipe stop will have to move out of the way for th epipe to roll by after rail is full - anyone out ther use anything
  5. Byucougar

    nitrogen in iron

    we are making a casting - and purge the ladle with pure nitrogen - looking at using a membrane system with liquid backup to save money - what issues will I have if I use a lower purity nitrogen?
  6. Byucougar

    nitrogen in iron

    purge out the impurties - balance oxygem argon etc
  7. Byucougar

    nitrogen in iron

    Can you purge molton iron with 99.9 % nitrogen in place of 100 % nitrogen?
  8. Byucougar

    Running round stock through oven

    Yes, I could do non contact but will it handle th temperature?
  9. Byucougar

    nitrogen in iron making

    can you purge molton iron with 99.9% nitrogen without getting impurities - looking at getting an onsite system to be main supply with liquid nitrogen tank as backup?
  10. Byucougar

    Does anyone know of a cheap system?

    Does anyone know of a cheap vibration instrument which can take readings, then download to computer for analysis? JOhn
  11. Byucougar

    Running round stock through oven

    I run round stock in various diameters going through the oven horizontally rolling down being pushed by a chain conveyor with peridic ss rods that stick up into the furnace and when then rolling stock runs over it, it depreeses the rod and activates the switch. That is way it is suppose to work...

Part and Inventory Search

Back
Top