Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. subchrissea

    Flanges

    If the ring joint is 625 and you make up a joint where one flange does not have 625 cladding, you will get an electrolytic action, where the non clad flange will be anodic. A CP system could reduce this if you choose add it. So short answer is no as it will corrode. Hope this helps!
  2. subchrissea

    Valve Questions - 22" Piggable Line

    The valve is there for a reason, probably to isolate the line for loading or unloading the pig launcher. If the valve is flanged you need to ensure you replace it with a valve the same end to end dimension. Pigs normally require the bore size to be within +/- 5% of the pipe ID. A pipe at is...
  3. subchrissea

    Long life, quick switching time, steam valve.

    Suggest you research TLX Technologies mini high speed Solenoids They claim 300 mill cycles 248 deg C 0.2 milliseconds
  4. subchrissea

    API 6D Slab Gate Seats: RTFE vs Devlon vs Metal to Metal

    A lot will depend on the bore size of the valve but under normal circumstances Devlon would be perfectly acceptable and would not deteriorate in the brackish water. The non metallic seating such as Devlon is used for two purposes in a slab gate valve. Firstly, to act as a wiper on the gate to...
  5. subchrissea

    Filling in Text with color

    Thanks very much LawrenceS2. Your information was super helpful.
  6. subchrissea

    Filling in Text with color

    For clarification, I am talking about text on a 3D model. I know you can choose font, but am not sure if you can fill the text with color. My alternatives would be to insert from sketcher into my model.
  7. subchrissea

    Filling in Text with color

    I'm new to Creo. Anyone know how to fill in Text with color? It gave me the choice of text font but not whether I wanted said text filled or not. Any help would be appreciated. Thanks!

Part and Inventory Search

Back
Top