Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  • Users: Nelso
  • Order by date
  1. Nelso

    Large plastic deformation of a thin plate

    Hi everyone, i'm analysing a screwjoint in abaqus cae 6.5. Its a joint with two thin plates of aluminium connected by a self-tapping screw. To determine the shearforce-resistance of the joint the two plates are applied with a deformation of 3mm among eachother. After 1mm there are very large...
  2. Nelso

    Problem with py command

    yes thx, im sorry i couldnt try it last week because i had to work. thx a lot Greets from Europe
  3. Nelso

    Problem with py command

    I tried your idea with the Bias command, but there is no difference. abaqus shuts down, when entered the command. Greets nelso
  4. Nelso

    Problem with py command

    Thanks for your help xerf, but i have a last question: How can I described such a formulation m.rootAssembly.Set(name='Auflager', referencePoints=(m.rootAssembly.referencePoints[23], )) with the findAt command or with a link to RFP1: RFP1=m.rootAssembly.ReferencePoint(point=(-e...
  5. Nelso

    Problem with py command

    Thanks for your answer, but my question was about the formulation of the second command, the first one is ok ( without typing the ratio argument). But the formulation doesn't work with the seedEdgeByBias command. Is there a fundamental difference ? Thx and Greets Nelso
  6. Nelso

    Problem with py command

    This problem i think i have fixed now. Another problem is the formulation of this: BTI1.seedEdgeByNumber(edges=(BiasEdge1, BiasEdge2, BiasEdge3, BiasEdge4, BiasEdge5,BiasEdge6, BiasEdge7, BiasEdge8,), number=5, ratio=5) BTI1.seedEdgeByBias(end1Edges=(BiasEdge1, BiasEdge2, BiasEdge3...
  7. Nelso

    Problem with py command

    Hi everybody, I'm a Abaqus beginner and have a little question to you. I'm working in Abaqus with Python commands and don't know how to formulate the following kind of command : myPart.SeedEdgeByNumber(edges=myPart.edges.findAt((a, b, c),), number=5) The Error message is: Type Error: edges...

Part and Inventory Search

Back
Top