Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. JeroenD

    NX11.0.1 MP2: CAM: cylindrical avoidance when 4-axis drilling

    Our automation doesn't allow clicking this option. Manually, it would work for this part because there are always holes on the complete circumference. So the optimal path would never go through the middle to reach another hole. Still it doesn't prevent the spindle from going through the middle...
  2. JeroenD

    NX11.0.1 MP2: CAM: cylindrical avoidance when 4-axis drilling

    No, it's one of those (older?) drilling dialog boxes which doesn't show any "Non Cutting Moves" option. Not even when customizing the dialog. The avoidance dialog shows this: As you can see, it mentions clearance and lower limit planes. But no cilinder option. Is there prehaps another...
  3. JeroenD

    NX11.0.1 MP2: CAM: cylindrical avoidance when 4-axis drilling

    Hello, I have a ring which has points drilled all around the outside. They are drilled with the drilling operation (no cycle) which uses some other geometry for selecting the holes. This part uses expressions to resize the ring. We need to be able to produce CAM for various sizes. Therefore we...
  4. JeroenD

    NX10.0 CAD: advanced blend settings: capping blend size at small surfaces

    Hello, I have a ring with various grooves cut on the outside. To simulate buffing of the outside, I want to put blends on the outside edges to dull the corners. The objects is driven by expressions which can increase the width and diameter (and number of grooves) of the ring. In the edge blend...
  5. JeroenD

    NX10.0 CAM: 4-axis roughing with variable streamline gives unexpected/unwanted result

    Hello, I'm trying to mill a groove wrapped around a 4th axis. This groove has a variable width and isn't straight. I first want to use a flat endmill with diameter 1mm to try and cut as much as possible (the minimum width is less than 1mm). For this I want(ed) to use "Variable Streamline" with...
  6. JeroenD

    NX8.5: using nth and mod functions in law curve

    Thank you both for your response. It is indeed a toroidal surface instead of a cilindrical one. I have tried the Curve on Surface option as Xwheelguy suggested, but it doesn't give the desired result (although it could come in handy in other drawings). I have managed to create what I wanted by...
  7. JeroenD

    NX8.5: using nth and mod functions in law curve

    Hello, I'm trying to wrap a series of lines onto a cilindrical surface that's bent in 2 direction (it's a wedding ring, see picture in attachment). For this I'm trying to use a single law curve. As input I have a list of coordinates that should form the end points of these series of lines. I...
  8. JeroenD

    CAM: Re-enable warning message

    Thank you both for your response. I've tried the interface preferences option (registery editor seemed a bit more complicated) and it worked. Thanks!
  9. JeroenD

    CAM: Re-enable warning message

    Hi, I recently had a warning message "Motion to Start of Engage" in CAM. I accidently checked "Don't display this message again" before clicking on OK and now (as expected) the message doesn't show anymore. I want to re-enable that message but I can't find it. I presume it's located somewhere...
  10. JeroenD

    CAM: Fixed Contour Area with Spiral drive method gives unwanted retracts

    Thank you very much. I hadn't tried streamline yet. I didn't realize it had the option for a spiral drive method. Now I've tried it and it seem to work as I had originally planned. Many thanks for your response :-).
  11. JeroenD

    CAM: Fixed Contour Area with Spiral drive method gives unwanted retracts

    Hi, I'm having trouble getting a suitable milling path for milling a curved circular surface. I have this ring with has a wave-like side with a curved surface which needs milling using a ball cutter. I was planning on doing this with a Fixed Contour Area operation with a Spiral drive method...
  12. JeroenD

    4/5-axis surface milling with a flat endmill

    I've managed to get it (more or less) how I want it by creating sheet geometry in the contour of the cross with a bottom surface. I then use Variable Contour operation with a Contour Profile drive geometry while selecting the walls and bottom surface. So far it seems to work fine enough.
  13. JeroenD

    4/5-axis surface milling with a flat endmill

    Good day, I'm requiring a little help with 4/5-axis milling of a surface with a flat endmill. We fabricate wedding rings and would like to use a new machine and CAM to do some mill work required for setting stones (in this case a setting called a pavésetting). I've got the turning down to how I...

Part and Inventory Search

Back
Top