Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations KootK on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. ifegermany

    Initial/residual stress due to shot peening process

    I think simulating that effect realistically isn't that transparent (see gurmeet2003), so I sugested a method which just ignores the deeper intrications, caused in the real manufacturing process. A layer-, element- or integration-point-wise varying INISTRESS seems more like it (again see...
  2. ifegermany

    Initial/residual stress due to shot peening process

    why not use a fine graded mesh at the surface, varying E-Modulus according to hardness. Frank Exius IFE Deutschland www.ife-ansys.de Telefon ++49\2642\980409 Germany Dienstleistung in ANSYS FEM Berechnung Simulation Digital/virtual Prototyping
  3. ifegermany

    Questions for the experts!!

    qwicker, "..affected by defined inelastic material properties.." ANSYS reduces the stiffness to a factor of 1/100 if plasticity is present, if I recall ok. Check with Contact Guide - if this applies only if plasticity is actually present, or if the sole definition of the plasticity law is...
  4. ifegermany

    Questions for the experts!!

    Hi qwicker, to get back to your initial question i.e. 'why did the Sparse solver not solve in-core'. I did check your output1.jpg: at least at that attempt to run the job you got less RAM available then required for in-core (excerpt reported in attachment). Why your box started out at...
  5. ifegermany

    Ansys acoustic analysis - I need Help!

    to get the velocities in the fluid, you might need use appropriate label NMISC on PLSOL, as given in element description in doc's
  6. ifegermany

    Ansys acoustic analysis - I need Help!

    displacements are available at FSI structural elements
  7. ifegermany

    Ansys acoustic analysis - I need Help!

    the nodal velocities are available, not displacements Frank Exius IFE Deutschland www.ife-ansys.de Telefon ++49\2642\980409 Germany Dienstleistung in ANSYS FEM Berechnung Simulation Digital/virtual Prototyping
  8. ifegermany

    Press fit

    you get ‘contact derived’ results on both components for symmetric as this option generates contact faces on both components, while asymmetric creates them on one components faces only - target faces have no such results available. Frank Exius IFE Deutschland www.ife-ansys.de Telefon...
  9. ifegermany

    Coinsiding nodes on Electromagnetic Egde Based Harmonic Analysis??

    you did specify a non-zero resistivity I assume, as this is a pre-requisite for calculating currents. SOLID117 minimum dimension is refered in Element Reference as 1e-6 length units. So really, you should be save with MKS, having a actual lenght of 400e-6 units. But if you want to change see...
  10. ifegermany

    Engineers to regain lead at Ford and suppliers

    patprimmer puts things quite well. To converse i.e. cooperate appears a major aspect, besides buying in the best deal (best quality/price ratio, not cheapest) integrated by the advice that one should do his work well instead of engaging in non-indicated interference with that what others are...
  11. ifegermany

    Engineers to regain lead at Ford and suppliers

    IFEgermany (Automotive) Jul 23, 2003 refering to car related product failures, the discussion on reasons - speaking with car dealers/mechanics, one is ocasionally told, that in parallel with such failures the products appear as to have invisibly degraded in quality: i.e. parallel to these...
  12. ifegermany

    Engineers to regain lead at Ford and suppliers

    Hello plasgears, for aerospace the security aspect has to be at it's highest, but nevertheless, appart from spectacular cases as tires dismanteling etc, the automotive industry delivers well overall. They take care, in that they choose with attitude, suppliers which are to deliver savety...
  13. ifegermany

    Cyclic loading-fatigue failure

    Hello elogesh, thanks for the status. I'll check if I find published sources on that theme, get back Regards, Frank
  14. ifegermany

    Engineers to regain lead at Ford and suppliers

    Hello plasgears, thanks for the German adressing : ) assuming unsuitable people for suppliers enginnering posts might again be related to cost pressure by OEM - or to greed by supply org leaders, it varies I suppose. If one finds a unsuitable supplier, I do not gather why keep with him, other...
  15. ifegermany

    Engineers to regain lead at Ford and suppliers

    I wanted only to add that I understand very well the frustration of being in a place were the job is done by a supplier and the engineer is basically left to watch - that's not in the proper sense of 'shadow engineering' as mentioned as well in the article. Please take into account that this...
  16. ifegermany

    Engineers to regain lead at Ford and suppliers

    The article appears mainly as being the usual business strong talk. Sure devicencies (on parts and people - oiled guys which create less profitable business then expenses) happen, but these are statistically distributed between OEM and supply partners. As can be red, Chrysler instead plans to...
  17. ifegermany

    Cyclic loading-fatigue failure

    hello elogesh, can you indicate e.g. some web link wrt accelerated life testing (some clear cut info on how it is done)? wrt multi-axial enabled codes, I'd think also nCode and probably some other have this capability. Regards, Frank
  18. ifegermany

    Cyclic loading-fatigue failure

    Hello chorus, clear, sense making, all points you make. I tried only to trow some light on the weight of the experimenters arguments mentioned, because FEA based fatigue evaluation sometime has an area of retroactivity instead of a predictive nature (i.e. confident prediction of life range...
  19. ifegermany

    Getting Exposure

    magnificent - Rjeffrey's quote fundamental, wit, emotional intelligent molded into one. With giants being a symbol for people carrying a soul Frank Exius IFE Bonn Germany www.ife.subito.cc Telefon ++49\2642\980409 Dienstleistung in ANSYS FEM Berechnung numerische Simulation Digital/virtual...
  20. ifegermany

    Cyclic loading-fatigue failure

    hello chorus, thanks for additional comments and also for those references. I take what you say as given, i.e. standard specimen S-N data being sufficient to evaluate fatigue at surface locations of arbitrarily shaped parts. The question came up as some people from testing sustain that you...

Part and Inventory Search