Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Search results for query: *

  1. Ajith Kurian Baby

    Unable to get values for UREF in UMESHMOTION Subroutine

    I am trying to do a static analysis with periodic motion. The model has two rectangular blocks in which bottom one is fixed and top one is reciprocating with an applied normal load as pressure. Adaptive mesh constraint were used to input subroutine .I am using UMESHMOTION subroutine to...
  2. Ajith Kurian Baby

    How to print CSTRESS value using subroutine

    I am doing a reciprocating wear simulation using umesh motion subroutine. In my problem, I had modelled it as a static problem and applied periodic motion for the top body while the bottom one is fixed. I tried to use the following utility routine to get CSTRESS, but its always displayed as...
  3. Ajith Kurian Baby

    How to specify velocity in umesh motion subroutine

    I am doing a reciprocating wear simulation using umesh motion subroutine.I want to computer wear rate and end of each cycle using archards wear equation. I have only basic idea aboutt this analysis. Should i use static or dynamic analysis for wear simulation on a reciprocating wear analysis?. In...
  4. Ajith Kurian Baby

    How to get UREF value during analysis

    is it possible to print UREF values during each increment? what does UREF mean. does that indicate the velocity values or displacement values? Can we print nodal velocity values during an increment in case of a static analysis?
  5. Ajith Kurian Baby

    How to get UREF value during analysis

    I am doing a wear simulation using UMESHMOTION subroutine. In my model, there are 2 bodies in relative motion and the bottom one is fixed while the top one is having a periodic motion. The adaptive mesh is also specified. I need to get UREF value during each increment for wear calculation. how...
  6. Ajith Kurian Baby

    Output request not available for this type of analysis

    Yes, I have seen that. But in my problem, whenever I call utility routine CALL GETVRMAVGATNODE(NODE, JTYP,'VAR', ARRAY, JRCD, JELEMLIST, NELMS, JMATYP, JGVBLOCK), the JRCD value comes out as 1. the same problem happens to GETNODETOELEMCONN utility routine. CALL GETNODETOELEMCONN(NODE, NELMS...
  7. Ajith Kurian Baby

    Output request not available for this type of analysis

    Dear FEA way, Can I get cstress for static analysis using GETVRMAVGATNODE utility routine.
  8. Ajith Kurian Baby

    Output request not available for this type of analysis

    I am doing a wear simulation using UMESHMOTION subroutine. In my model, there are 2 bodies in relative motion and the bottom one is fixed while the top one is having a periodic motion. I had requested for a velocity output but it shows a warning OUTPUT REQUEST V IS NOT AVAILABLE FOR THIS TYPE OF...
  9. Ajith Kurian Baby

    How to find output request error

    I am doing a wear simulation using UMESHMOTION subroutine. in the subroutine, I used a utility routine CALL GETVRN(NODE,'V',VEL,JRCD,JGVBLOCK,LTRN). JRCD is a return code which is returned as 0 when no error is present or 1 when there exists an output request error or all components of the...
  10. Ajith Kurian Baby

    GETVRMAVGATNODE is not available in adaptive mesh domain

    I am not able to get any value by using GETVRMAVGATNODE and GETVRN utility routine. It always shows a value of 0 or a very low value nearly equal to zero. I tried with different variables but smae result is obtained for all variables . Is there any thing we need to define or declare specifically...
  11. Ajith Kurian Baby

    The adaptive mesh region contains zero elements

    I am using quad elements. when I use tet elements it works fine. does that mean, the quad element is not supported for adaptive meshing?
  12. Ajith Kurian Baby

    GETVRMAVGATNODE is not available in adaptive mesh domain

    I am trying to simulate a wear problem using UMESHMOTION subroutine. while running the subroutine it shows a warning as below: WARNING: NODE NUMBER 6405 INSTANCE PART-2-1 SPECIFIED IN UTILITY ROUTINE GETVRMAVGATNODE IS NOT AVAILABLE IN THE ADAPTIVE MESH DOMAIN. why this is happening. how can I...
  13. Ajith Kurian Baby

    The adaptive mesh region contains zero elements

    I was trying to simulate a wear problem and I got the following error message: The adaptive mesh region contains zero elements. Please ensure that valid element types compatible with the adaptive mesh feature was selected. The application of adaptive mesh constraints requires the definition of...
  14. Ajith Kurian Baby

    nodal velocities are always displayed as a very low value

    I am trying to simulate a wear problem. I have a hemisphere moving over a fixed rectangular surface. the hemisphere is given a periodic motion with displacement in x-direction and pressure is applied on its top surface in the y-direction. the adaptive mesh was used along with umesh motion...
  15. Ajith Kurian Baby

    Can we obtain nodal velocities by using subroutine by specifying displacement boundary conditions

    Without and with subroutine it is working and showing values like mises stress in abaqus post processor but it is not printing correct values with sub routine
  16. Ajith Kurian Baby

    Can we obtain nodal velocities by using subroutine by specifying displacement boundary conditions

    I am trying to run a wear simulation problem by using UMESHMOTION subroutine
  17. Ajith Kurian Baby

    Can we obtain nodal velocities by using subroutine by specifying displacement boundary conditions

    Dear Sir, I am dealing with a problem in which two bodies are in relative motion. the bottom body is fixed and the top is in motion. the top body is given with periodic boundary condition. The top body is also applied with pressure load. I was using "umeshmotion" subroutine and need to extract...
  18. Ajith Kurian Baby

    how to set constraint type as spatial

    can anyone help me to set constraint type as spatial in adaptive mesh constraints.
  19. Ajith Kurian Baby

    PROBLEM DURING COMPILATION

    Check log file to identify the error
  20. Ajith Kurian Baby

    CSTRESS value is not obtained when using GETVRMAVGATNODE function

    Dear FEA way, Pls help me to solve this problem

Part and Inventory Search

Back
Top