Norm!!! It's been a while since I've seen you on the F body forums.
The bolt clearances are pretty tight, I machine out the welded inserts to just clear the stepped shoulder on the bolts. Also, after 1 event the top bolt now has to be hammered in place. So something in there moved around a...
Lol, I asked myself the same question! It's a go pro stick on mount, if it was moving then it should look like the bolt is moving the wrong way based on the tension and compression of the panhard bar. I also looked at the details around the perimeter of the frame and it doesn't appear that the...
I meant everything on the passenger side in the video is moving, looks to be bending mostly.
I doubt the driver side is moving too. The flange that bolts to the frame doesn't show any scratches from the serated washers. Also, if both the driver side and passenger side of the frame are moving...
Thanks for all the replies, I'll try to cover all the topics in this post.
-I painted what I made before reassembly, and it is a bit of a tight fit, see the picture here. There does seem to be some 'itching' but I can't tell if it's just from installation and removal a few times. In this...
Evening all, this is my first post on this forum to help me figure out why my contraption is bending under load while another design is not. I'm going to try to describe the issue the best I can for those of you not familiar with the car.
I'm working on an autocross car (about 3,400 lbs. and...
