I work with a small packed column ( 3ft x 45ft), which normally runs under 125 mmHg vacuum and a O/H condenser cooled by water. Last week, we steamed the O/H condenser line to the steam jets and we found wood chips, which are coming from the cooling tower. Since then, the dist. tower is...
I work with a small packed column ( 3ft x 45ft), which normally runs under 125 mmHg vacuum and a O/H condenser cooled by water. Last week, we steamed the O/H condenser line to the steam jets and we found wood chips, which are coming from the cooling tower. Since then, the dist. tower is...
Yes, I didn't include the steam condition. I am sorry. The steam is a superheated steam, and the temp for the product are: inlet product (45C) and outlet(225C).
JimCasey, I am not sure if I understood.
steam mass = (inlet steam enthalpy)- (outlet steam enthalpy)/(energy required to heat the...
I have a question.
I need to size a steam flow control valve at a pre-heater. The only information I have are: steam inlet pressure (337 psig), steam inlet temp. (290C), product density (1.010 g/cm3)and product specific heat (2.46 J/g).
How can I calculate the steam flow throught this pre-heater?
