Search results for query: *

Thanks to everyone for your comments I will give it a try.

Yes, I am looking for comments on this, especially on the Graphic Card

Hi, I am trying to get a laptop with below specs and is it possible to use for NX9 when I visit my customers OS Operating system Windows 10 Home 64 PROCESSOR Processor Intel® Core™ i7-6500U with Intel® HD Graphics 520 (2.5 GHz, up to 3.1 GHz, 4 MB cache, 2 cores) MEMORY Memory, standard 16 GB...

Toost, Thanks for posting the sample file When we create a text in drafting, it's like note It doesn't translate or export to stp file for our CAM department and CNC Is there any solutions or different font to go in modeling Thanks to everyone for the suggestions

Hi, I am looking for a single line font suitable for engraving on CNC I need to model this in NX8 and send to our machine shop for them to program on different CAM software Can anyone please suggest one? Thanks!

cowski, I tried to run this in an assembly and it just displays the Reference and XYZ dimensions Is it possible to add a solid bounding box around each part it in the assembly level, without going into each part and crate the box individually Thanks!

If you look at the tutorials within SW, there is a very nice tutorial explaining the step by step use of mold tools There are videos on the internet showing the mold design in SW Please see this one Once you get a basic idea of mold tools, you try on your part and if you still have problems...

You can open this file directly in SW2012 and use the mold tools to crate the mold for this part. It's a simple part and easy to create mold core, cavity and slide.

tepex, Have you tried to split and what's the problem you face? If you post the work you did, someone could help you.

Here is the exploded view of the core & cavity http://files.engineering.com/getfile.aspx?folder=9cf80cd9-544e-4b85-809b-976cab90b0f7&file=zidni_nosac_zakacka_3.png

sokoban, Your imported part geometry has errors. Before you start creating parting line and parting surface, you must fix this first. Need to modify some of the faces for negative draft. This gives a better split. Certain face may be done with a manual split. Hope this helps to create your split

thread559-215560 I was browsing thru the above discussion and run that macro on my SW 2012 and it gives "system error...." and "out of memory" Can someone help Thanks,

Updraft, Which version of SW? Are you using the toolbox on network or individual computer? You can add a new part as low-head and configure

kris, Few things to review 1. If you check the draft, the thumb area and wrist area on the other side are showing negative draft. You must correct this before splitting into core and cavity. 2. Your parting surface after the split should go horizontal, not vertical as shown in your model. 3...

Appreciate your comments. I am trying to practise modeling in SW Thanks

Hi, I am looking for orthographic views or any reference books with 2d drawing of models to practise modeling and assembling in SolidWorks. I did go thru the SW tutorials and it is limited. Please post the links or the names of books Thanks in advance.

Thanks Jeff and CBL This forum is really helpful

Can I copy one sketch to another plane which is parallel to the sketch plane without loosing its constraints? or fully defined. Thanks

This hole table is generated by SW2010 SP4. Matt, This is part of an Ejector Retainer Plate of a Mold Design. It is the proper plan view of the mold. If I turn the drawing around,it will give the counter-bore holes visible,but will give wrong co-ordinates in relation to the main mold parts...

I was trying to create a hole table for one of the job and noticed the call out something weired. The counter bores are far side of the view, but the call out showing Near Side. How can I make it to show "Far side" in the Call Out? Thanks