Hello,
I am applying hall sensors and are looking for reputable Neo magnet material manufacturers (not distributors) to produce 200,000 pieces per year.
Any help would very appreciated.
Joe
Hello,
I am in need of a human hand model for NX and was wondering if anyone knows where I could find one or would be willing to share theirs with me.
Best Regards,
J
Hello,
I am frequently asked to repair castings via welding or brazing and I do not know of a way to distinquish between a cast iron and cast steel casting.
Does anyone have a way to tell if a casting is made of steel or iron?
Thanks in advance for your help.
krue0101
I am trying to convert some test specifications from ASD to PSD and make sure I am getting equivalent requirements.
Some research I have done say ASD is the same as PSD.
I don't know what to believe.
Could anyone help me out on this issue?
Your experience would be appreciated.
Thanks
Joe
Hello,
I am searching for any general design tips on how to design a convoluted boot correctly.
Does anyone have any ideas where to find this type of information? Suppliers? Application info?
Any help would be very appreciated.
Best Regards,
joe
Hello,
I was hoping someone might have training info avaialable for Nx NASTRAn.
Any help would be appreciated as I am stumbling through the contact element nuances blindly.
Thanks You.
Joe
Hello,
I have a zinc on zinc ball and socket joint that has a very low contact pressure in the joint but it stills wants to wear out. I am using Zamak 5 on Zamak 5.
Does anyone have any ideas on how to solve this wear problem?
I would like to remain with zinc die cast parts.
Thanks,
JJ
Hello,
I have the need to fasten two dissimilar thermoset parts together.
Does anyone have any ideas how to do this?
Is there any type of welding that might work?
Is there any type of adhesives that might work?
Any help would be appreciated.
thanks,
Joe
Hello,
I was wondering if anyone might know where I can find a design guide/ book/ articles on designing and qualifying fixtures for a shaker table.
I know that designing the test fixtures is an important step in vibration testing and any help on this subject would be appreciated.
Thanks,
Joe
hello,
Can anyone tell me the theory behind the optimum location for a pusher fan in relationship to a radiator on a gas engine.
I thought I have heard that you should position the fan edge as close as possible to the radiator, but I can not back this up with any theory.
Can anyone give me a...
Hello,
I am trying to determine the optimum clearance between the fan and radiator on a gasoline engine.
I am talking about a pusher fan that is pushing air through a liquid radiator on a home made tractor.
It seems like I have found somewhere that the fan should be placed as close to the...
Hello,
It is a real wheel drive vehicle.
I will use the coefficient of traction for concrete.
What else can I do analytically to determine the rear wheel torque required to climb this curb?
Thanks,
I have a 20inch diameter wheel and would like to climb a 6inch curb so I just did a fbd of a tire up against a curb and summed the moments about the point that the tire meets the curb.
I came up with [F(axle forward)*4 inches]- [Weight(vehicle)*10inches] = 0.
It seems pretty simple, but I am...
Hello,
I am building a utility vehicle and am trying to determine if I will be able to climb curbs with it. I am having a tough time calculating the required force/tractive effort to get up a 6" curb with a 21" tire.
Can anyone help?
Thanks
Hello,
I was wondering if there is a general trend in engine designs about heat rejection versus engine combustion efficieny. I have heard it both ways = cleaner burning engine runs hotter and cleaner burning engine runs cooler.
Can anyone shed some light on this question?
Thanks in advance...
Hello,
I am working on an industrial application with a port injected gasoline engine and am having vapor lock issues due to the temperature of the bulk fuel and inlet vacuum. Due to design constraints I am not able to flood the inlet of the fuel pump or use an in-tank pump. I am also stuck...
