I was thinking along the same idea and both our chemical engineers here said we cannot put that in the line because moisture would migrate back to the drying chamber and increase drying times. Also at 29 inches of mercury vacuum the water would constantly boil off
hello,
I am working as an engineering intern at a nylon production facility and am trying to determine how to capture caprolactam that is released from our pellets that are dried under heat and vacuum in a conical dryer.
The problem is that when it is released it moves into the vacuum lines...
He said he had seen failed injectors but not several of them fail at the same time. your idea of one going bad then the others leaking as a result is interesting.
Although we had the fuel rail raised and when you turn the key on to build pressure then turn it off they all seem to start...
does anyone know of a company that sells venturi air cleaners. I am dealing with a process that has a vacuum line connected to a large conical tumble dryer to dry nylon.
The problem is a monomer is released from the nylon and clogs up the vacuum system causing downtime.....i am thinking a...
No i have always viewed those "cleaners" as snake oil, i did however one time have to use an octane booster because i let Mom drive the car and she put 87 in the car and it requires 93 octane with any amount of boost from supercharger. I should have cut one of the injectors in half and examined...
I have a car with GM 3800 supercharged v6, 5 fuel injectors failed all at the same time. They would leak all the fuel line pressure into the cylinders/manifold making the car extremely hard to start.
The guy that fixed said he has been working on GM cars for 25 years and never seen five...
I have been asked to find a method of capturing the monomer released when we dry our nylon products (it clogs our vacuum lines and damages pumps).
I am sure there must be some condensing device that would work well for such a purpose but i have searched online and found nothing.
If anyone can...
