Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Sketch Failure Message in NX 1

Jashe

Automotive
Joined
Jun 19, 2013
Messages
209
Location
US
How do I either fix this or keep this from happening? I'm working with NX 1919.
1745529204499.png
 
Without knowing more but just from this message, I would guess that you somehow lost the sketch origin (either you suppressed something or maybe you modeled away something that caused the sketch origin point to be gone)
 
Without knowing more but just from this message, I would guess that you somehow lost the sketch origin (either you suppressed something or maybe you modeled away something that caused the sketch origin point to be gone)
Yes, I used a point from the edge of a cylinder to create another cylinder and Extruded and Subtracted the Extrude from the body which included the edge that I used the center point. I tried using a point from a different edge. No luck.
 

Part and Inventory Search

Sponsor

Back
Top