Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Zim64

  1. Zim64

    Lightening holes standard

    Can somebody refer to Lightening holes standard. The required standard is for round lightening holes having formed 45 degrees flanges (usually fabricated in aluminum webs)
  2. Zim64

    Stringer repair at B767, B737, B777

    Thanks to All, In general, I am familiar with approval procedure of Boeing or DER if repair deviate from SRM just we have a dispute. I don't want to bore you with details, only to understand if you met this type of repair (plug with soft rivet) in your practice. (Hole was drilled by mistake in...
  3. Zim64

    Stringer repair at B767, B737, B777

    Good day, I have a question: it is acceptable to plug hole in radius with rivet or need to repair stringer per standard SRM repair (trim damaged area)?
  4. Zim64

    Aft Pressure Bulkhead Web - Repair

    I go to perform repair per Boeing SRM, but it interesting for me. That is all.
  5. Zim64

    Aft Pressure Bulkhead Web - Repair

    This is B767-300,-200 SRM, logical it is to install repair doubler on the fwd side of the bulkhead web, because cabin there is pressurize area and web concave to aft direction....
  6. Zim64

    Aft Pressure Bulkhead Web - Repair

    Maybe someone have idea why per Boeing SRM typical Aft Pressure Bulkhead Web repair, repair doubler must be install on Aft side of initial web. And fasteners with the driven head on the Aft Pressure Bulkhead Web. Thanks
  7. Zim64

    PMS of Airbus

    Thank you for your help.
  8. Zim64

    PMS of Airbus

    Anybody know what does mean PMS of Airbus and where can I see that ? Thanks, Maxim
See more

Part and Inventory Search

Back
Top