Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations waross on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by zcchene46

  1. zcchene46

    Higher boost and E85 or Methanol

    If possible, run E85!
  2. zcchene46

    Twincharging - calling Warpspeed!

    Actually I have more questions. for a 1.6l/rev blower, it means that it is plumbing very closely 1.6 litter per revolution if the inlet air pressure is the atmospheric pressure; but what if it is being fed charged air of 2.5 bar (1.5 bar from the turbo plus 1 bar of the atmosphere)? Will it...
  3. zcchene46

    Twincharging - calling Warpspeed!

    After reading this over again, I actually confused myself on all those boost numbers.. Mac initially ran 2.5bar total and 1.5bar from the turbo. Does it mean that the supercharger is working at a ratio that produces (2.5+1)/(1.5+1)=1.4bar? So (1.4-1)*14.7=5.88psi read on a boost gauge? And then...
  4. zcchene46

    Sequential Turbo

    hemi, I just learned that idea from this thread: thread181-27567 You should read through it if interested
  5. zcchene46

    Sequential Turbo

    R34ztune, Have you thought about making a twin turbo system where a bigger feeds charged air to a smaller turbo? The system will go like this Hot side: Exhaust Manifold>Big Turbo>Small Turbo>Exhaust Charge side: Air Filter>Big Turbo>Small Turbo>Cooler>Throttle Body>Intake Manifold The small...

Part and Inventory Search