cub3bead,
Thank you for the information. If the make up water is not softened what would be a suitable chemical program to follow with low amounts of make up? Also I will be talking to a chemical company regarding this but I would like to have as much info. prior as possible
Thank you
WTP03
I am looking for information on water testing requirements to be done for an industrial hot water heating system? If any one has information on where I can find guidelines for chemical addition and or typical hot water heating chemistry program plus typical water testing done on such a system...
I would be concerned with the connection point to the CIP. 93% and 316SS will not be a problem until it comes into contact moisture. Use of a back pressure valve at the CIP connection will keep positive pressure on the acid line through to the CIP connection not allowing moisture ingress and...
Thank you: Smile 1
You have been very helpful and I am confident that we are on the right track for starting to reduce costs and maintain stability. We are also doing a amine balance test prior to any major changes.
WTP03
I am not aware of a amine based regeneration chemical for cation, anion mixed bed polishers some more information on this would be greatly appreciated. Also for an update we just went to a 1:1 mix of “steamate and Ammonia for a trial period to see how the process steam and condensate return...
The steam pressure varies from 770 to 1450 pounds dependent on load and Duct fire. I am looking into a cost effective replacement for "steamate" due to high injection rates. The condensate return from the steam host is "pollished" and the amine feed is high due to this...
I am looking for a cost effective replacement for the GE Betz Dearborn product “steamate” as a neutralizing amine in a high pressure steam service. Does any one have experience using commodity chemicals of Ammonia and Morpholine as a replacement and any problems to watch for ?
WTP03
I have a question regarding the bench pH testing of boiler water. Should the sample be stirred(aggitated) while it is being tested or will this result in a lower pH reading due to more dissolved gasses being introduced to the sample. ?
WTP03
