Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by woodengineer

  1. woodengineer

    Special Wood Connectors

    I worked as a truss engineer for a manufacturer and would occasionally need a specialty hanger fabricated. I found USP to be the better choice over Simpson. They have engineers that will design a hanger to fit your need using a finite element package and provide you a signed and sealed...
  2. woodengineer

    cross grain bending

    Design values do exist. Contact AF&PA for guidance. Also the ANSI TPI addresses this issue regarding bolted hangers on bottom chords of trusses. Good luck. woodengineer
  3. woodengineer

    Structural 2 Exam or not?

    Utah Senate Bill 200 had provisions which exempted applicants for licensure as a professional structural engineer from examination requirements under certain circumstances, until January 1, 2009. http://le.utah.gov/~2008/bills/sbillenr/sb0200.htm ...(e) have successfully completed three years...
  4. woodengineer

    Structural 2 Exam or not?

    Question: I am licensed in 32 states as a PE after passing the structural 1 exam (7 years ago.) Recently, a colleague informed me that since I am a grand fathered structural engineer in Utah, I can put "SE" after my name. Although I may have the SE designation in Utah, I have been debating to...
  5. woodengineer

    shape the top of a Glulam ridge beam

    It depends how the laminations are positioned. In a uniform beam lay-up, the grade and stress values of the laminations in the compression zone, the tension zone and the inner zone are the same throughout. "Glulam Uniform" is used mainly for resisting axial loads. In this case, I'd imagine you...
  6. woodengineer

    Whet happened when you became a PE? Promotion? Raise?

    It really depends on a number of factors. How many years of experience do you have and what are they paying now (prior to passing your PE). Stuctural Engineer magazine publishes annually a compensation report. You can find it on the web by seaching through their archives. Congratulations on...
  7. woodengineer

    Enercalc

    Nobody at Enercalc is returning calls. woodengineer
  8. woodengineer

    RELATIVE RIGIDITY IN WOODEN SHEAR WALLS

    Here is a quick answer: http://www.curee.org/projects/woodframe/element5/modules/shearwall/deflection.htm woodengineer
  9. woodengineer

    Residential Deck Ledger attached Through Masonry

    Putting the brick issue aside; it is best to design desi.gn the deck system as free standing. Virginia Tech has done a great deal of research on the subject matter as well as attachment of rail posts to deck. I would definitely design the deck as free standing. woodengineer
  10. woodengineer

    Fraudulent Use of PE Stamp!

    This guy needs to be prosecuted!!! woodengineer
  11. woodengineer

    Need Structural Drawings for Special Inspector Training Course

    I believe the Masonry text book written by Amherein has a couple good examples. It does not have complete plans. woodengineer
  12. woodengineer

    Wood Roof Joist Grade

    SperlingPE, I could not find any design values from my cursory search. It did specify #1 or better though. Go to the WLCIB website and they have a link and a contact number to that associations board. I start with a phone call to that agency. Sorry I couldn't be more help. Good luck...
  13. woodengineer

    Wood Roof Joist Grade

    Apparently, Para 123-b of WCLIB refers to grading requirements for structures (rather than sign posts, fences,etc.), specifically, No. 1 and better, grade for materials 2" to 4" nominal thick, 5" nominal and wider (Structural joists and planks) woodengineer
  14. woodengineer

    Wood Roof Joist Grade

    "[ WCLIB]. Use. Grade. Grading Rule. Stress F. b. Rafter, joist, studding 2 x 6 and. [ No. 1]. [ Para. 123-b]." -According to my google search it would appear that 123-b and 123-c are paragraphs within the WCLIB (West Coast Lumber Inspection Bureau) grading standards. Your question peaked my...
  15. woodengineer

    Load Combination Question/Poll

    The multiple tranient live load reduction is used quite often in designing roof trusses. You can see the advantages especially when designing attic trusses. It make it quite difficult to properly load girder trusses with the common trusses taking advantage of the live load reduction...
See more

Part and Inventory Search

Back
Top