Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by Windsor377

  1. Windsor377

    Octane questions & discussion

    Have you ever spoken to the folks at Klotz? http://www.klotzlube.com/
  2. Windsor377

    Camshaft Gear Drives

    I'm sure, in the end, it will depend on the belt, but I can tell you we've got a combination that may be helpful for comparison purposes. It is, however OHV and 2 valves per cylinder. Still the valve springs are 300lb on the seat and 875lb open at .754" I'm assuming your 260 on the seat and...
  3. Windsor377

    Camshaft Gear Drives

    How many cylinders and are those open or seat numbers?
  4. Windsor377

    Exhaust collector configuration.

    LOL! You are welcome Larry! I need to clarify though. I've sold those heads to a fellow racer (Larry Palmer) for his R/S car. I think I can geta pic of it: http://www.mdstreetracingassoc.com/ http://www.mdstreetracingassoc.com/rules.html It's the blue Mustang. He had a problem at Cecil...
  5. Windsor377

    Camshaft Gear Drives

    Interesting. Thanks. So the helical cut will tend to undo he things I am worried about in a gear set?...hmmm...I still think a gear set upsets the valve train when an idler is used.
  6. Windsor377

    Exhaust collector configuration.

    Larry, I've got a new toy, but it's the same vintage! take a look at the "old" Mustang! http://mysite.verizon.net/vze7umdz/ The header situation is a bit frustrating, but I guess everyone is in the same boat? I've got to thank you for the help you've given me. The C3H heads you cleaned up...
  7. Windsor377

    Exhaust collector configuration.

    Thanks MB. I didn't wat to intrude, but the topic is timely. SSO is for Super Street Outlaw. I also support a Real Street car (R/S).
  8. Windsor377

    Exhaust collector configuration.

    Thanks Larry. I didn't think there was an easy way out. I'll ask one more question then leave MBs thread alone. Would it make any sense at all to try to build step headers with the "un-equal" length primaries. If so, would it make more sense to tune each step of each pipe with regards it's...
  9. Windsor377

    Exhaust collector configuration.

    I don't know. You better keep an eye on what the MaxRaceSoftware guy has to say! Larry and MB, do you mind if I ask another header related question here? The 4 2 1 configuration has me pondering the "un-equal" length headers I need to run in SSO combinations.
  10. Windsor377

    Convection Coefficient

    Is there a variation for a "gasoline" buring engine? Does the text fully explain the constants?
  11. Windsor377

    Camshaft Gear Drives

    I wouldn't argue gear or chain for OHC applications. That seems to be a pendulum that swings back and forth over the years. Also, as facinated as I am with muliti valve DOHC combinations, I really don't spend time in that arena, other than visiting a friends shop that specializes in Bike and...
  12. Windsor377

    Camshaft Gear Drives

    Well, I guess we all agree about belts. But, I guess we've had some different experiences with gear sets. My own personnal experience: I will only try another gear set in an OHV pushrod engine, IF and only IF it is without idlers and has a built in dampening system. The gear sets I looked at...
  13. Windsor377

    Roller Camshaft

    RoverV8, I missed the question earlier re. steel cam core. Yes, I run a special billet steel core. This is a different core than a standard solid roller core. Shaun's Co has direct sources for these cores.
  14. Windsor377

    Roller Camshaft

    Good point(s) Shaun. The cylinder walls should be prepped very "softly". They should look like they were honed with steel wool. As for oil control. I run .005" under on 3mm low tension sets. No problem. Don't think I'll go without though. My next NA engine I am considering...
  15. Windsor377

    Roller Camshaft

    Roverv8, different diameters and widths are available. It is VERY important to make sure that block will accommodate. I was a teenager the last time I saw the Buick version of that block. I don't know if it had enough meat to support those bearings...I'm sure it has been improved with time.
See more

Part and Inventory Search

Back
Top