Thank you all.
another question related to this project is :
if tanks are filled 90% and 50% respectively.
should i multiply surface area with .90 and .50 respectively ?
i am taking operating temperature as 100+ 60 /2 = 85 F ( 100 being the fill temperature and 60 being air temp inside the tank)
There are two tanks
1) 140' diameter x 40' High , cone roof
2) 80' diameter x 45' high, dome roof
tanks are filled 75% and the operating temperature inside should not exceed 225 F.
insulated with 2inch thick polyisocyanurate foam with a foil vapor barrier on both sides.
my question is how to...
HI I am working on a project where PRV is currently taking 210 PSI steam and converting it to 10 PSI steam. This creates an energy loss
The customer is proposing taking existing 70 PSI steam from the exhaust end of an electricity-generating steam turbine to convert to 10 PSI steam instead...
Hi
per my design scope , i have to supply make up air to the office, conference room, secretary plus i have to tie up locker and toilet area.
now exhaust for locker and toilet are is 850 cfm so i need that much make up air from vav system, which also serves the other administration area.
total...
Hi,
anyone familier with the newyork city boiler stack calculation format?
what is the overfire draft of the boiler?
i have a furnace pressure of +5.5inches of w.c and max. allowable flue gas outlet pressure at the boiler is +0.5".
also i have the number for boiler draft loss which is 5.5" @...
