CAN ANY ONE GIVE SOME FILES IN Communications architecture in modern distribution systems?
The practical implementation of an 11 kV rural distributionautomation pilot scheme?
i am thinking about the lightning arrestors
is it possible that we have one lightning arrestor which is not working as designed?
and is there some kind of a protection relay that could act like this during specific conditions?
and there is any industrial consumer at that feeder?!
hi every body
i am facing a strange problem
we have a generation power station that feeding 8 OHL MV 13.8kv feeders
and in one specific feeder @ peak load ( 4.2 MW ) suddenly the load goes down for 2 MW and then retain gradually to 4.2 MW withen 3-4 minutes.
we checked the OHL and nothing...
hi every one
if I have a 13.8 kv MV OHL
the total length of it is 110 km
and after 60 km the voltage droped from 13.8kv to 11kv
is it possible to install transformers that its primary voltage is 11kv after 65km?
hi every body
i will have to do some routine tests regarding surge arrestor rated 33KV
i would like to have a refrence and types of tests regarding that
hi every body
can any one help me with the technical standard for installing autoreclosers on MV 15 KV over head line
reagding distance - NO of consumers etc
hi every one
IS THERE ANY PROBLEM TO OPERATE A DISTRIBUTION POLE MOUNTENED TRANSFORMER WITH ALMOST NO LOAD?
if possible can any one eplaine that for me or give me a web site that could be useful
hi every one
actualy i want to do some tests in surge lightning arrestors. what techniuque should i use in order to insure i am getting the good stuff?
hi every one i have a question about the HV and LT cables specifications
what is the standard depth for installation a HT and LT cables?
is there an equation to calculate that?
the HT cable voltages are 11 Kv 13.8Kv 33Kv and 400v ?
if there any site will help to understand that.
and always...