Recent content by Vaione

hey man sorry i miss printed this its not 15000 it is 1500..

hey guys thanks for all repiles. I was out of town for last 2 days.We have generator and Pump both at plant. now we looked into wiring and other consideration. we can hook up our pump with our generator. But we need to put out 15000 GPM water. Now only 75 hp motor we help woth this and lower Hp...

ok waross.. thanks for suggesting this, but still any other way around that we can change pumping rate or somthin??

Its a spare one. i dont know why my boss wanted to get rid of steam turbine. but he has idea about electric motor driven pump and want to hook up generator so when electricity gonna down we can esialy run our pump using generator.

I got your point. only bigger capcaity generator is the way or we can put two pump and share our load.

hey guys i am working in additives plant. we have hazardeous waste called hexane. we storage it in standard size drum. now it not under the roof. my research says that at around 90 F its pressure is 4 Psai and and at 100F it is 8 Psai. my question is how we can keep low temprature. is shade will...

hey guys how are u all? Hey we have steam turbine pump at cooling tower and now we wanna switch to electric motor driven pump. we are plannin to put 75 HP motor and wanna hook up our motor to generator, but now question arise, our generator capasity is 55 KW and when i counted Kw for 75 HP...

hey guys how are u all? Hey we have steam turbine pump at cooling tower and now we wanna switch to electric motor driven pump. we are plannin to put 75 HP motor and wanna hook up our motor to generator, but now question arise, our generator capasity is 55 KW and when i counted Kw for 75 HP...

Hello all, This is vai. I have just got new project from my boss related to increase the capacity of rotary pump.Let me explain wat we are doing here. we have 3GRW worthington pump with 20 HP, 885 RPM motor. basically we are using this pump at spot "1" to pumping out material from rail car...

hey all thanks! yes it is vertical turbine. i tried to find detail online but not able to get it. let me check with ruhrpumpen.

anyone have detail for this pump. not able to find info online, and also dont have name plate on pump. please guide me?

gO TO hYSIS HELP.. IT WILL GIVE YOU ALL DETAIL ABOUT SIZING THE DISTILLATION COLUMN. ACTUALLY THERE ARE FEW CASE STUDY, SO GO THROUGH THAT AND IT WILL HELP U LOT TO UNDERSTAND SIZING AND MODELING. HEY FOR FIRED HEARTHER PROBLEM CHEK HEAT BALANCE OR MASS BALANCE ACROSS THE STREAM AND TRY TO...

hey thanks everyone. I really aprreciated your talks. it found it very helpful. hey sorry if i gave any wrong comments. every one here are very far knowledge worthy then me.

hey jim your right. and i really sorry that ppl are targeting your remarks, but i found ur talks very helpful. can you suggets how i can cut cost for steam means how i can save steam so i can save money. need general idea??

HEY JIM AND JOHN, I REALLY APPRECIATED YOUR COMMENTS AND I M REALLY SORRY IF I SAID SOMTHIN WRONG. I KNOW I WILL FIND BUNCH OF DETAIL FROM VENDOR'S SUTE BUT I FOUND THIS SITE'S PERSONS LIKE U AND JIM MORE HELPFUL. SEE I HAVE KNOWLWDGE ABOUT CONDENSATE TRAP TOO.. REALLY SORRY FROM JUNIOR ENGINEER...