Thanks for your links,
To be more precise, it should measure temperature between -10°C and + 90°C, with 0.1°C accuracy.
I need only 1 probe.
The pushbutton is here to indicate to the electronic card (and not a computer or PC) that the temperature has to be memorized via the serial interface by...
The display is useful to determine the moment to press the "RS-232" button.
So the RS-232 function is useful because the electronic card needs to record the value of the temperature when the "RS-232" button is pressed. This value is then treated by the software of the card.
So these 2 functions...
Thanks for the link,
But, in fact, I'm looking for something very simple to use:
In the best case, what I'm looking for is a simple probe (to measure the food's temperature) with:
- an ON/OFF switch (or ON button with autoshutdown)
- a "Send the current value to the RS232" button,
- a simple...
Hi,
I'm looking for a thermometer to measure food temperature, with a display of that measurement, and a rs232 interface to read the value of temperature.
This "probe" will be connected to an electronic card and this card need to read that probe at a specific instant (while the user of the...
