Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by ubercad

  1. ubercad

    Underlining overriden dimensions in drafting

    CorBlimeyLimey, yours was the best response, but I would be satisfied with an armed escort out of the building for such offenders. In the 15 years I have been working there have always been those who, due to ignorance, laziness or apathy, have decided to take the easy way and cheat by...
  2. ubercad

    Underlining overriden dimensions in drafting

    I wondering if there is any way of automatically underlining any dimension in drafting that has been overridden. I would like to see a checkbox included in either Tools > Options > System Options > Drawings> OR Tools > Options > Document Properties > Dimensions so that one can choose to...
  3. ubercad

    Numerical display description in drafting

    OK.. So how do I start catia in admin mode? I am not a CAD administrator by hobby or proffesion, nor am I a "computer geek". Please spell it out for me.. letter by letter... The glass is operating at 50% capacity.
  4. ubercad

    Numerical display description in drafting

    I have a drawing set to ANSI B and have my units set to inches. How come when I create a new dimension it comes in as an experssion of a foot (FEET_INC)? 2.50 in appears as .2'. Sure I can chage the diplay of the dimension after the fact, but how do I change the defaust setting so that all my...
  5. ubercad

    NX Student / Private Edition

    Hey John, What's the latest on Seimens rolling out an NX licence for students and general public? I want MY NX! The glass is operating at 50% capacity.
  6. ubercad

    Proper Nomenclature when refering to I-deas

    Good to know. I just hope managers don't use the term NX6 to describe NX I-deas 6m2. Some probably will. The glass is operating at 50% capacity.
  7. ubercad

    Proprer nomencalture when refering to I-deas

    So what is the latest release/version of I-deas called? Is MS still used? (as in NX I-deas MS12) I've seen somewhere it being called NX I-deas 6. Pontentially confusing if you ask me. I guess when recruiters ask me what's the latest version of I-deas that I've used, I'll just tell them "the...
  8. ubercad

    Proprer nomencalture when refering to I-deas

    What happened is that UG got relabled as NX. Slowly some funtionallity from I-deas is being incorporated into newer versions of NX. I thought Siemens was not going to do anything with I-deas past MasterSeries 12. Apparently this is not the case...
  9. ubercad

    Proprer nomencalture when refering to I-deas

    In the past when I-deas was still owned by SDRC people would use the terms SDRC or I-deas interchangebly to refer to the softaware. Sometimes both (SDRC I-deas). SDRC of course was aquired by EDS, but there are ads out there for jobs looking for people with SDRC expereince (where have these...
  10. ubercad

    Proper Nomenclature when refering to I-deas

    In the past when I-deas was still owned by SDRC people would use the terms SDRC or I-deas interchangebly to refer to the softaware. Sometimes both (SDRC I-deas). SDRC of course was aquired by EDS, but there are ads out there for jobs looking for people with SDRC expereince (where have these...
  11. ubercad

    Student Versions of NX/Solid Edge?

    John, Any update as to if/when Siemens will make available a trial or student version of NX4,5,6... avialable to those of us who are out of work and only last used a earlier version of NX and would like to keep up with the latest version of NX so they can add to their marketability? I last...
  12. ubercad

    Student Versions of Solide Edge/ NX?

    ...here's another.. http://lunderkin.com/buy_cheap-solid-edge-16-oem.php I'm a little skeptical of these sites though... The glass is operating at 50% capacity.
  13. ubercad

    Student Versions of NX/Solid Edge?

    Hey John, I just stumbled accross these sites: (I don't know why they didn't turn up before) http://lunderkin.com/buy_cheap-solid-edge-16-oem.php http://www.archwaysystems.com/archway/prodsolidedge.htm Are these legit? The glass is operating at 50% capacity.
  14. ubercad

    Student Versions of Solide Edge/ NX?

    Um... seems like this discusion has veered off course a bit. We are discussing SolidEDGE here. But I just stumbled across this... http://www.archwaysystems.com/archway/prodsolidedge.htm I wonder why this never turned up in my previous searches? Now if Seimens would offer a student version...
  15. ubercad

    Student Versions of Solide Edge/ NX?

    from beachcomer: "I had exactly the same problem with SolidWorks when I was unemployed recently. I contacted a supplier to get a 30-day copy to brush up my skills but was told no chance." Obtaining a student version is as easy as registering and signing up for a class - probably something cad...
See more

Part and Inventory Search

Back
Top