Thanks for your answer,
I have submitted the analysis to FEA supplier and He didn't find any problem.
I think it could be an hardware problem; by means of specific hardware test CPU, RAM, HDD & GPU have been excluded as fault cause.
The last chance is the power supply, it could be undersized...
Hello,
I would like a suggestion to configure a new workstation for FEA.
At the moment, I am using a WS with TYAN s5396 MB, n.2 XEON E5430 @ 2.66GHz , 16 Gb RAM and NVIDIA Quadro 4000 2Gb; sometime, during the analysis, the WS does not work and it needs to be re-started!!!!
It happens random...
I would like to model a pipe with welded elbows, which receives water from a pump and jet it in atmosphere.
The pipe is loaded with internal residual pressure, load due fluid velocity and jet reaction.
When I apply only the residual pressure on the internal surface of pipe and albows, the model...
Thanks Cheddarcaveman,
It is a fire truck pump and here attach there is a section of.
Dear
http://files.engineering.com/getfile.aspx?folder=4cba6a9b-3c5a-431a-b4c0-594019ec9047&file=pump.pdf
Dear Forum,
I am checking some centrifugal pump's drawing and I need to know if the gap, between impeller OD and casing ID, is correct.
OD impeller 237 mm
ID casing 241 mm
Gap 2 mm
Flow 3600 l/min at 12 barg
4000 RPM
Could someone help me!
Thanks a lot
Hi,
I'm not a " complete biginner" but, until now, the FE analisys was performed by an external office of my company.
When I say "I don't know how I'm going to use the package" I mean that I need an expandible package so in the future I will can upgrade it for more complex analisys than now...
Hi,
I don't know how I'm going to use the package; For that I need a reliable and expandible package.
At the moment I have to verify statically and dinamically some steel frame, valve body and manifold.
For a centrifugal pump, I have to study the fluid flow in order to optimize the performance...
Hello to all,
I need to buy a FEA package for my activity;
Does anyone advice me for Algor or Cosmos?
We design package for oil&gas sector, fire fighting equipment and mechanical components and We have Pro-E and Solidworks.
Thanks
