Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations 3DDave on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Recent content by tiagols

  1. tiagols

    Segmental reinforcing elements in storage tank

    Hello, The API-650 standard allows bipartite reinforcement plate for tanks? Thank you!
  2. tiagols

    ASME II Part D

    Thanks!!!
  3. tiagols

    ASME II Part D

    Hello! The criteria for establishing allowable stress table 1-100 of the ASME II Part.D also apply to seamless tubes? Greetings.
  4. tiagols

    Tube for heat exchanger

    Dear Mike, The design temperature can not be changed. I thought of the possibility of using a tube 1 1/4Cr-1/2Mo, what do you think?
  5. tiagols

    Tube for heat exchanger

    Hello everybody.I have a design heat exchanger and it is specified maximum design temperature of 335°C.However, the materials for seamless pipes and tubes available in ASME Part B(SB338 and SB861) has maximum design temperature 315°C, as ASME Part D.Do you have any other suggestions to titanium...
  6. tiagols

    UCS-56 item (d)(2)

    Hello! Item (d)(2) of UCS-56 says During the heating period there shall not be a greater variation in temperature throughout the portion of the vessel being heated than 250°F (120°C) within any 15 ft (4.6 m) interval of length. I wonder if the code refers to 4.6 meters long welding or the...
  7. tiagols

    Heat Treatment A-268 TP-410

    What is the appropriate heat treatment to the A-268 TP-410? Quenching and Tempering? Thanks
See more

Part and Inventory Search

Back
Top Bottom